topic Re: Defaut Gateway in Operating System - HP-UX

Defaut Gateway

Paolo Paparella_1 — Wed, 05 Sep 2001 06:48:56 GMT

Hello,
I have a problem with Default Gateway in my server.
I have used the command 'route' for add the gateway, but in this away I must every morning to do this.
How and Where I can write the Gateway in definitive way?

Thanks
Paolo Paparella

Re: Defaut Gateway

Sridhar Bhaskarla — Wed, 05 Sep 2001 06:56:47 GMT

Paolo,

You don't to add it everyday. You can define it in your /etc/rc.config.d/netconf file like below.

ROUTE_DESTINATION[i]="default"
ROUTE_GATEWAY[i="aa.xx.yy.zz"
ROUTE_COUNT[i="1"

Where i is your default lan interface usually "0".

You can do a /sbin/init.d/net stop and /sbin/init.d/net start to activate.

For subsequent reboots, the system will add the gateway for you.

-Sri

Re: Defaut Gateway

Sridhar Bhaskarla — Wed, 05 Sep 2001 06:58:21 GMT

Also, if you do not want to play with files, you can use

set_parms addl_network to add the default gateway.

-Sri

Re: Defaut Gateway

Shahul — Wed, 05 Sep 2001 07:45:10 GMT

Hi

There are different ways to set default gateway. I hope set_parms is the safest way to do this.

#set_parms addl_netwrk

Now it will ask for default gateway, gateway hostname and subnet address. Set it properly. Then go to /etc/rc.config.d directory. Checkup the default gateway entry is changed to the new one which U given in netconf file.

Another way is run sam->networking and communication->network addresses->action. Here U can see the option for changing th default gateway.

Best of luck

Shahul

Re: Defaut Gateway

Sanjay_6 — Wed, 05 Sep 2001 12:51:54 GMT

Hi Paulo,

Have a look at these earliar threads from the forun itself.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x22845220af9bd5118ff10090279cd0f9,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0xae765220af9bd5118ff10090279cd0f9,00.html

Hope this helps

Thanks

Re: Defaut Gateway

Ravi_8 — Wed, 05 Sep 2001 13:35:05 GMT

Hi,
you can do this in 2 ways. make the entry in /etc/rc.config.d/netconf file for the parameters ROUTE_GATEWAY[0]="x.x.x.x"
ROUTE_COUNT[0]="1"
x.x.x.x is your default gateway and reboot the machine.

Or you can also do it by command
#set_parms addl_netwrk

Re: Defaut Gateway

harry d brown jr — Wed, 05 Sep 2001 14:12:11 GMT

You must be rebooting your server every night, correct? Follow the above advise and make the changes to the netconf file. If you aren't rebooting every night, then you have some other issue.

Re: Defaut Gateway

James Odak — Wed, 05 Sep 2001 19:55:45 GMT

set_parms only works on the primary card, if you have more then one card or only use a card not setup as primary set_parms will not help you
surest bet is to edit the netconf file as mentioned above, where [#] #=the card that is enabled