topic Re: Auto Port Aggregation in Operating System - HP-UX

Auto Port Aggregation

Ganesh_4 — Thu, 13 Sep 2001 09:11:55 GMT

Machine Config: L-Class with 2GB RAM/EMC Array
4*HP PCI 100BaseT network card
I am using cisco switch. Can I use auto port aggregation for network card Redundancy. I dont have M/C service guard.

Thanks in advance

Re: Auto Port Aggregation

Sridhar Bhaskarla — Thu, 13 Sep 2001 10:01:49 GMT

Ganesh,

I think APA is supported only on Cisco Catalyst 5000 Series. You need to check if it is supported on L-class server. I did some research sometime back for T-600 and gave up as it was not supported for that model.

-Sri

Re: Auto Port Aggregation

Marcin Wicinski — Thu, 13 Sep 2001 10:23:46 GMT

Hi,

As far as I know any Cisco switch which supports Fast Ether Channel (FEC) is supported by HP APA.

Later,

Re: Auto Port Aggregation

Marcin Wicinski — Thu, 13 Sep 2001 10:33:51 GMT

One more,

But tested are Cisco Catalyst 5000 series switches.

Re: Auto Port Aggregation

Marcin Wicinski — Thu, 13 Sep 2001 10:36:05 GMT

One more,

A5506A/B PCI 4-port 100BT adapter is supported.

Re: Auto Port Aggregation

melvyn burnard — Thu, 13 Sep 2001 11:43:39 GMT

Go take a look at the documents at:
http://docs.hp.com/hpux/netcom/index.html#Auto%20Port%20Aggregation%20(APA)
Especially the Release Notes:
Also ensure you have the latest patches installed on the system.