https://community.hpe.com/t5/operating-system-hp-ux/alias-ip-address-to-loopback-interface-for-failover/m-p/2552760#M593598 Note the following from the 11.11 release notes (p. 198)<BR />"Using the loopback interface lo0:1, lo0:2 and so on, the system will respond to the IP address assigned to these interfaces using any phsyical interface. Thus, a system can now have a "systemIP" address that will be available as long as one interface stays usable........With the new VIP feature, a remote user can specify an IP address that will respond regardless of the local interface where the packet arrived. This feature is an enhancement."<BR /><BR />Has anyone successfully implemented this enhancement?<BR /> Sat, 14 Jul 2001 16:23:13 GMT Raman Yousefi 2001-07-14T16:23:13Z https://community.hpe.com/t5/operating-system-hp-ux/alias-ip-address-to-loopback-interface-for-failover/m-p/2552760#M593598 Note the following from the 11.11 release notes (p. 198)<BR />"Using the loopback interface lo0:1, lo0:2 and so on, the system will respond to the IP address assigned to these interfaces using any phsyical interface. Thus, a system can now have a "systemIP" address that will be available as long as one interface stays usable........With the new VIP feature, a remote user can specify an IP address that will respond regardless of the local interface where the packet arrived. This feature is an enhancement."<BR /><BR />Has anyone successfully implemented this enhancement?<BR /> Sat, 14 Jul 2001 16:23:13 GMT https://community.hpe.com/t5/operating-system-hp-ux/alias-ip-address-to-loopback-interface-for-failover/m-p/2552760#M593598 Raman Yousefi 2001-07-14T16:23:13Z