https://community.hpe.com/t5/operating-system-hp-ux/l2000-modem-support/m-p/2538714#M595098 I would not recommend trying to put a UUCP modem on the Remote Console port. Realize that the Remote Console port is just that, a CONSOLE port. Do you really want to give the outside world possible access to your console? .... On to your main question: Will it work? Yes it should. Tue, 12 Jun 2001 23:17:51 GMT Craig Gilmore 2001-06-12T23:17:51Z https://community.hpe.com/t5/operating-system-hp-ux/l2000-modem-support/m-p/2538713#M595097 Hi,<BR /><BR />I am endeavouring to configure a modem on the Remote Console port on an L2000 run 11.0. I have read lots of documents and forum questions on this. There are some documents which suggest this is a non-standard 9pin serial port and only MT predictive support modems will work on this, and any other modem access requires a mux card. But there are others which suggest other modem types have been used ok. I need to configure a modem for UUCP dialout and file transfer use. Will the Remote Console port work or not?<BR /><BR />thanks, Greg. Mon, 11 Jun 2001 01:33:40 GMT https://community.hpe.com/t5/operating-system-hp-ux/l2000-modem-support/m-p/2538713#M595097 Greg Hall 2001-06-11T01:33:40Z https://community.hpe.com/t5/operating-system-hp-ux/l2000-modem-support/m-p/2538714#M595098 I would not recommend trying to put a UUCP modem on the Remote Console port. Realize that the Remote Console port is just that, a CONSOLE port. Do you really want to give the outside world possible access to your console? .... On to your main question: Will it work? Yes it should. Tue, 12 Jun 2001 23:17:51 GMT https://community.hpe.com/t5/operating-system-hp-ux/l2000-modem-support/m-p/2538714#M595098 Craig Gilmore 2001-06-12T23:17:51Z