topic Re: make_recovery via an AT schedule in Operating System - HP-UX

make_recovery via an AT schedule

Tommy Brown — Fri, 18 Aug 2000 13:55:29 GMT

Has any one ever done a make_recovery tape after hours with an AT command. Was it tested afterward?
thanks,
Tommy

Re: make_recovery via an AT schedule

Rick Garland — Fri, 18 Aug 2000 13:57:07 GMT

I use cron. It works fine - no trouble. After the make_recovery process is complete, it sends me an e-mail telling me it completed, the time it started, and whether it was sucessful of failed.

Re: make_recovery via an AT schedule

Stefan Farrelly — Fri, 18 Aug 2000 13:58:02 GMT

We run make_recovery regularly over the weekend using cron, and test it regularly, works fine.

Re: make_recovery via an AT schedule

Victor BERRIDGE — Fri, 18 Aug 2000 14:04:10 GMT

I also never had problem using cron with make_recovery
Good luck

Re: make_recovery via an AT schedule

Tommy Brown — Fri, 18 Aug 2000 14:12:54 GMT

Thanks, All of you, I will set this up ASAP.
Thanks again.
Tommy