topic remsh in Operating System - HP-UX

remsh

Joe Profaizer — Wed, 24 Jan 2001 14:32:18 GMT

All of the sudden our remsh program terminates with the following error:
TCPIP$RSH - Permission denied - host IP addr

We're accessing an Compaq alpha running OpenVMs 7.2-1 and running TCPIP Services for OPenvVMS v5.0a.

Please consult. We're not sure if the problem lies on the vms server on the HP L1000.

Re: remsh

James R. Ferguson — Wed, 24 Jan 2001 15:57:06 GMT

Joe:

Check /var/adm/inetd.sec for entries that deny access. You are looking for a service name of "shell" for "remsh".

...JRF...

Re: remsh

Douglas Cromby_1 — Wed, 24 Jan 2001 16:08:39 GMT

Can you successfully telnet across to the server and run the same command as the remsh? Finding this out may give you a clue to where the problem lies.

Re: remsh

Stuart Powell — Thu, 25 Jan 2001 12:51:43 GMT

Run "man" on "hosts.equiv". That will give you information on setting up system equivelancies. There should be a similar file on the VMS system. Since the error message is all caps it is probably coming from the VMS system. Even if the systems are equivelant, "remsh" requires the user to be equivelant as well ($HOME/.rhosts).