topic Re: Raptor configuration in Operating System - HP-UX

Raptor configuration

Raymond F — Tue, 06 Jun 2000 15:09:34 GMT

I am running Raptor firewall v6.0 on HPUX 11.00. I have a client that needs to connect to a remote Citrix server from behind the firewall. Does anybody know how to configure the firewall for the Citrix ICA Client to access a remote server? I have tried connecting to the Citrix server by bypassing the firewall, so I know that the firewall is not properly configured for Citrix ICA Client.

Re: Raptor configuration

Berlene Herren — Tue, 06 Jun 2000 16:08:33 GMT

According to Raptor's site (http://www.raptor.com/cs/FAQ/eunv6faq.html)
this is set up passing via Application Proxy.

Berlene

Re: Raptor configuration

Raymond F — Tue, 06 Jun 2000 17:39:55 GMT

I couldn't reach your link, Berlene. I was able to finally get it working. I created a protocol for Citrix, created a GSP service, and created a rule for it. The key was finally finding the proper port via log errors. Thanks.

Re: Raptor configuration

Berlene Herren — Sun, 11 Feb 2001 13:10:50 GMT

I too, have had problems lately getting to that site. Symantec says to "keep checking." Thanks for the feedback, Raymond, and I am glad it is working.

Berlene