topic Network Card in Operating System - HP-UX

Network Card

Nick D'angelo_3 — Tue, 25 Apr 2000 10:20:59 GMT

Hello,

Can anyone tell me how I can check to see that our network card is operating at
100mb/sec or not?

There must be a command somewhere. Ifconfig btlan01 indicates that it is up
and so on, but not with much details.

Please reply,

Nickd

Re: Network Card

Berlene Herren_1 — Tue, 25 Apr 2000 12:01:04 GMT

If you are patched up, you can issue:

#lanscan >> note the NMID/PPA (10.20/11.0)

#lanadmin -x NMID/PPA >> this will display current speed/duplex

#lanamin -X 100FD NMID/PPA >> this will set it to Full Duplex.

use 100HD, 10FD, 10HD >> whatever your switch is set to.

Berlene

Re: Network Card

Nick D'angelo_3 — Wed, 26 Apr 2000 05:18:38 GMT

Thank you for reply.

Can I change this on the fly, or will changing the speed knock my users off??

Thanks,

Nickd

Re: Network Card

Berlene Herren_1 — Wed, 26 Apr 2000 07:15:35 GMT

You can change it on the fly, just make sure your switch is running what you
want to set the card to, or it can hang.

Berlene