https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443952#M598630 Correction - make that the nmid number.<BR /><BR />lanadmin -x <NMID><BR /><BR />Can get this number from the lanscan command.</NMID> Fri, 08 Sep 2000 14:43:26 GMT Rick Garland 2000-09-08T14:43:26Z https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443950#M598628 On HP-UX 10.20 I need to know whether the NIC is running in Full or Half Duplex. <BR /><BR />With HP-UX 11 this is simply a case of: 'lanadmin -s #NMid', but I am having trouble finding an easy way to get this info with 10.20<BR /><BR />Many thanks in advance. Fri, 08 Sep 2000 14:08:57 GMT https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443950#M598628 Midrange Systems 2000-09-08T14:08:57Z https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443951#M598629 The same command will get the info you request. <BR /><BR />'lanadmin -x lanX' where lanX is the lan card you are seeking info about.<BR /><BR />Note that patches are required for this functionality. Depending on the driver will depend on the patches. Fri, 08 Sep 2000 14:37:29 GMT https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443951#M598629 Rick Garland 2000-09-08T14:37:29Z https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443952#M598630 Correction - make that the nmid number.<BR /><BR />lanadmin -x <NMID><BR /><BR />Can get this number from the lanscan command.</NMID> Fri, 08 Sep 2000 14:43:26 GMT https://community.hpe.com/t5/operating-system-hp-ux/half-full-duplex/m-p/2443952#M598630 Rick Garland 2000-09-08T14:43:26Z