https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133737#M599258 Sounds like it isn't masked correctly...<BR /><BR />Rgds...Geoff Wed, 23 Jan 2008 19:57:52 GMT Geoff Wild 2008-01-23T19:57:52Z https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133735#M599256 <!--!*#-->I have a 4 node MC/SG cluster. When I import my vg's on one of the failover nodes I get this error:<BR /><BR />Warning: Cannot determine block size of Physical Volume "/dev/rdsk/c10t15d7"<BR />Assuming a default value of 1024 bytes. Continuing.<BR /><BR />The disk is from an IBM disk array. I get this for every disk in every vg I import. Any idea why?<BR /><BR />Thanks,<BR />Keith Tue, 22 Jan 2008 20:54:01 GMT https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133735#M599256 Rick Copley 2008-01-22T20:54:01Z https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133736#M599257 Is the IBM Array suported by HP and MC/Service Guard ?, check the MC/SG support matrix. Wed, 23 Jan 2008 18:41:59 GMT https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133736#M599257 Andres Stickar 2008-01-23T18:41:59Z https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133737#M599258 Sounds like it isn't masked correctly...<BR /><BR />Rgds...Geoff Wed, 23 Jan 2008 19:57:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/vgimport-error/m-p/4133737#M599258 Geoff Wild 2008-01-23T19:57:52Z