topic Re: VxVM basic question - how to add a disk in Operating System - HP-UX

VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 09:45:17 GMT

Fresh HPUX install on this system after several disk crashes and we're now ready to configure VxVM. Only problem is, it can't see two of the newly replaced disks. ioscan & diskinfo see them OK but:

# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c4t0d0 auto:hpdisk rootdisk01 rootdg online
c4t1d0 auto:cdsdisk - - online
c4t2d0 auto:cdsdisk - - online
c4t3d0 auto:cdsdisk - - online
c4t5d0 auto:cdsdisk - - online
c4t6d0 auto:cdsdisk - - online
c5t8d0 auto:cdsdisk - - online
c5t9d0 auto:cdsdisk - - online
c6t1d0 auto:cdsdisk - - online
c6t2d0 auto:cdsdisk - - online
c6t3d0 auto:cdsdisk - - online
c6t4d0 auto:cdsdisk - - online
c6t5d0 auto:cdsdisk - - online
c6t6d0 auto:cdsdisk - - online
c7t8d0 auto:cdsdisk - - online
c7t9d0 auto:cdsdisk - - online
c7t10d0 auto:none - - online invalid

No sign of c4t4d0 or c6t0d0. There are no /etc/vx/*.exclude files and vxdctl enable doesn't seem to find the disks as I was led to believe.

/etc/vx/disk.info doesn't include the disks which I believe is the underlying fault but if this file has to be manually edited then I will need guidance as to how to get the appropriate information.

Cheers,

David.

Re: VxVM basic question - how to add a disk

Robert-Jan Goossens_1 — Tue, 26 Feb 2008 10:51:46 GMT

Hi Davis,

did you try vxdiskadm , replace a disk option?

Robert-Jan

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 10:57:18 GMT

Sorry, no good:

VxVM INFO V-5-2-396
There are currently no devices that are failed or removed.

Re: VxVM basic question - how to add a disk

Robert-Jan Goossens_1 — Tue, 26 Feb 2008 11:07:20 GMT

ok,

Try this.

# mv /etc/vx/disk.info /etc/vx/disk.info.old
# vxconfigd -k

To create a new info file.

Robert-Jan

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 11:12:51 GMT

Already tried that...sorry, still no good.

Re: VxVM basic question - how to add a disk

Siju Vadakkan — Tue, 26 Feb 2008 11:28:28 GMT

try following steps

1. vxdisk scandisks
2. vxdisk list

if still the problem persists do the following steps.

mv /etc/vx/disk.info /etc/vx/disk.info.old
vxconfigd -k -m enable
ioscan -fnC disk
vxdisk list

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 11:31:16 GMT

Further information:

It looks like 3 disks are unavailable, I had forgotten about c5t10d0. All three were recently replaced and all 3 are the same type, i.e. FUJITSU MAW3073NC

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
=======================================================================
disk 0 0/0/2/1.2.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c3t2d0 /dev/dvd-rom /dev/rdsk/c3t2d0
disk 1 0/10/0/0.0.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
disk 2 0/10/0/0.1.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c4t1d0 /dev/rdsk/c4t1d0
disk 3 0/10/0/0.2.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c4t2d0 /dev/rdsk/c4t2d0
disk 4 0/10/0/0.3.0 sdisk CLAIMED DEVICE FUJITSU MAW3073NC
/dev/dsk/c4t3d0 /dev/rdsk/c4t3d0
disk 5 0/10/0/0.4.0 sdisk CLAIMED DEVICE FUJITSU MAW3073NC
/dev/dsk/c4t4d0 /dev/rdsk/c4t4d0
disk 6 0/10/0/0.5.0 sdisk CLAIMED DEVICE HP 36.4GMAP3367NC
/dev/dsk/c4t5d0 /dev/rdsk/c4t5d0
disk 7 0/10/0/0.6.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c4t6d0 /dev/rdsk/c4t6d0
disk 15 0/10/0/1.8.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c5t8d0 /dev/rdsk/c5t8d0
disk 16 0/10/0/1.9.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c5t9d0 /dev/rdsk/c5t9d0
disk 17 0/10/0/1.10.0 sdisk CLAIMED DEVICE FUJITSU MAW3073NC
/dev/dsk/c5t10d0 /dev/rdsk/c5t10d0
disk 8 0/12/0/0.0.0 sdisk CLAIMED DEVICE FUJITSU MAW3073NC
/dev/dsk/c6t0d0 /dev/rdsk/c6t0d0
disk 9 0/12/0/0.1.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t1d0 /dev/rdsk/c6t1d0
disk 10 0/12/0/0.2.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t2d0 /dev/rdsk/c6t2d0
disk 11 0/12/0/0.3.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t3d0 /dev/rdsk/c6t3d0
disk 12 0/12/0/0.4.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t4d0 /dev/rdsk/c6t4d0
disk 13 0/12/0/0.5.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t5d0 /dev/rdsk/c6t5d0
disk 14 0/12/0/0.6.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c6t6d0 /dev/rdsk/c6t6d0
disk 18 0/12/0/1.8.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c7t8d0 /dev/rdsk/c7t8d0
disk 19 0/12/0/1.9.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c7t9d0 /dev/rdsk/c7t9d0
disk 20 0/12/0/1.10.0 sdisk CLAIMED DEVICE HP 36.4GST336607LC
/dev/dsk/c7t10d0 /dev/rdsk/c7t10d0

Re: VxVM basic question - how to add a disk

Robert-Jan Goossens_1 — Tue, 26 Feb 2008 11:32:42 GMT

and if you add them with

# /etc/vx/bin/vxdisksetup -i c4t4d0

Robert-Jan

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 11:38:51 GMT

# /etc/vx/bin/vxdisksetup -i c4t4d0
VxVM vxdisksetup ERROR V-5-2-43 c4t4d0: Invalid disk device for vxdisksetup

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 13:23:49 GMT

Found the problem...now how do we fix it?
Veritas sees c4t3d0 as ALL of the replaced disks...

# vxdisk list c4t3d0
Device: c4t3d0
devicetag: c4t3d0
type: auto
hostid:
disk: name= id=1203411685.113.loopback
group: name= id=1203410389.103.loopback
info: format=cdsdisk,privoffset=128
flags: online ready private autoconfig
pubpaths: block=/dev/vx/dmp/c4t3d0 char=/dev/vx/rdmp/c4t3d0
version: 3.1
iosize: min=512 (bytes) max=256 (blocks)
public: slice=0 offset=1152 len=71815272 disk_offset=0
private: slice=0 offset=128 len=1024 disk_offset=0
update: time=1203943437 seqno=0.14
ssb: actual_seqno=0.1
headers: 0 120
configs: count=1 len=640
logs: count=1 len=96
Defined regions:
config priv 000024-000119[000096]: copy=01 offset=000000 enabled
config priv 000128-000671[000544]: copy=01 offset=000096 enabled
log priv 000672-000767[000096]: copy=01 offset=000000 enabled
lockrgn priv 000768-000839[000072]: part=00 offset=000000
Multipathing information:
numpaths: 4
c4t3d0 state=enabled
c4t4d0 state=enabled
c5t10d0 state=enabled
c6t0d0 state=enabled

Re: VxVM basic question - how to add a disk

Siju Vadakkan — Tue, 26 Feb 2008 13:46:06 GMT

Re: VxVM basic question - how to add a disk

Siju Vadakkan — Tue, 26 Feb 2008 13:46:42 GMT

Hope Following steps will solve ur issue
try following steps

1. vxdisk scandisks
2. vxdisk list

if still the problem persists do the following steps.

mv /etc/vx/disk.info /etc/vx/disk.info.old
vxconfigd -k -m enable
ioscan -fnC disk
vxdisk list

Re: VxVM basic question - how to add a disk

David Freer_1 — Tue, 26 Feb 2008 13:53:53 GMT

As previously mentioned in this thread, these steps do not work.

Re: VxVM basic question - how to add a disk

Darrel Louis — Wed, 27 Feb 2008 07:40:12 GMT

David,

Check if your VxVm is Licensed
vxlicense -t VxVM
vxlicense -p

ioscan -fn
insf -e
vxdctl enable

vxdg free
vxdg list
vxdisk -o alldgs list
vxdisk -s list c4t4d0
/etc/vx/bin/vxdisksetup -i c4t4d0

Run vxconfig in debug mode:
vxconfigd â k â m enable â x9 â x log >/var/tmp/vxconfigd.log 2>&1

See also http://www.docs.hp.com/hpux/onlinedocs/5187-1374/5187-1374.html

GoodLuck
Darrel

Re: VxVM basic question - how to add a disk

David Freer_1 — Wed, 27 Feb 2008 08:31:01 GMT

Issue is now sorted, thanks to all those who replied. The problem was that vxddladm listjbod showed the system was looking at the first 10 characters of the serial ID for Fujitsu disks, not the full 12 and in our case the first 10 characters were all the same so it was being seen as multiple paths to the same disk.

# vxddladm rmjbod vid=FUJITSU
# vxddladm addjbod vid=FUJITSU length=12
# rm /etc/vx/disk.info

and a reboot solved the problem.

Re: VxVM basic question - how to add a disk

David Freer_1 — Wed, 27 Feb 2008 08:32:26 GMT

See above for solution.

Re: VxVM basic question - how to add a disk

Steve Post — Thu, 28 Feb 2008 13:35:03 GMT

I am speaking out of ignorance here. I haven't used VXVM.

From your question, it looks a lot harder to use than traditional logical volume managment (LVM).

Are the commands really so goofy?

steve