topic Re: Getting do_exec_no_pty error ! in Operating System - HP-UX

Getting do_exec_no_pty error !

Bala_Unix — Mon, 19 Nov 2018 11:16:11 GMT

Team

We are getting this error do_exec_no_pty: command = date while establishing concurrent ssh connections from Linux to HP-UX . Initiated 30 concurrent sessions but established only 19 connections 11 connections failed with this error code error do_exec_no_pty: command = ***

This is FYI

- Linux OS info - RHEL 7.3

- HPUX : 11.31

- Password less ssh configured between these hosts

Please help me on this case .

Thanks

Regards

Bala

Re: Getting do_exec_no_pty error !

RajUX — Thu, 22 Nov 2018 06:37:35 GMT

Increase npty, nstrpty and nstrtel to a higher value would be a possible workaround.

There is a possibility that some processes are not releasing pty devices.

Re: Getting do_exec_no_pty error !

Bala_Unix — Fri, 23 Nov 2018 08:06:15 GMT

Thanks RajUX

But Still getting this same error even after increasing these values and creating enough pty device files.

Re: Getting do_exec_no_pty error !

RajUX — Sat, 24 Nov 2018 08:54:17 GMT

Please make sure you have the increased number of devices by #ll /dev/pts|wc -l

If it has increased, did it work for sometime and issue started after some time? This is needed to confirm if new device files were also usable and it got exhausted. If yes, the device files may not be getting released by some processes and need more analysis by HPE.

Re: Getting do_exec_no_pty error !

Bala_Unix — Tue, 27 Nov 2018 11:35:57 GMT

Hi RajUX

Yes, Increased the devices .

ll /dev/pts|wc -l
2401

but still facing this same issue ..

Re: Getting do_exec_no_pty error !

RajUX — Wed, 28 Nov 2018 07:03:56 GMT

Upto how many sessions are you able to open?

Is this issue from linux to hp-ux only?

Could be issue with apps like sudo which does not close the connections properly.