topic Re: Swap management in HP-UX 11.23 in Operating System - HP-UX

Swap management in HP-UX 11.23

Sreer — Sat, 04 Aug 2012 13:46:09 GMT

Hello Gurus,

I need a help for deciding my swap usage in my 11.23.

Server details:

# uname -a
HP-UX rx260-04 B.11.23 U ia64 2549057637 unlimited-user license
[rx260-04]/
#
[# swapinfo -tam
             Mb      Mb      Mb   PCT START/      Mb
TYPE      AVAIL    USED    FREE USED   LIMIT RESERVE PRI NAME
dev        2048       0    2046    0%       0       -    1 /dev/vg00/lvol2
dev         512       0     510    0%       0       -    1 /dev/vgdata/lvswap
reserve       -     493    -493
memory     2037     607    1430   30%
total      4597    1100    3493   24%       -       0    -
[rx260-04]/
#
[rx260-04]/
#
[rx260-04]/
# kctune | grep -i chunk
swchunk                         2048    2048
voliomem_chunk_size             65536 Default
[rx260-04]/
#

I have 2 swaps as

dev 2048 0 2046 0% 0 - 1 /dev/vg00/lvol2
dev 512 0 510 0% 0 - 1 /dev/vgdata/lvswap

I think We can have only one primary swap in a server? if so " /dev/vg00/lvol2" is my Primary swap ?

And "/dev/vgdata/lvswap" is the secondary swap only?

My Server's Total memory is

# machinfo | grep "Memory"
Memory = 2036 MB (1.988281 GB)
[rx260-04]/
#

So My Physical memory = 2GB

Current swap = 2048M + 512M = 2.5GB

To calculate my swap :

System Swap = maxswapchunks * swchunk * 1k

Iam not getting the value of " maxswapchunks" is it a kernel parameter? But kctune is not giving any o/p in 11.23 ?

OR can I use the maxswapchunk always as 16384? The man page is confusing...

I think in any server by default max swap memory can be as 32GB [using the abov formula]??

If I need to use more than 32 GB then only I need to change the swapchunk value to more than 2MB?

So If I need to use 50GB as my swap

16384 X swapchunk X 1 = 51200

So swapchunk must be as 3.1MB ?

So do I need to set the swapchunk value as around 3072 Blocks [3MB aprox]??

Please correct me if iam wrong....

Rgds

Sreekumar

Re: Swap management in HP-UX 11.23

Dennis Handly — Sat, 04 Aug 2012 19:33:58 GMT

>If I need to use more than 32 GB then only I need to change the swapchunk value to more than 2MB?

>So If I need to use 50GB as my swap

If you need this much swap, it better not be for this machine, it will be very slow.

Instead get 50 Gb of RAM and you can use pseudoswap instead of swap.

Re: Swap management in HP-UX 11.23

Ken Grabowski — Mon, 06 Aug 2012 17:01:10 GMT

NO there is no kernel parameter in 11.23 of later for "system maximum number of swap chunks", it is a hard fixed number at 16384 . The only adjustable value you have to work with is the swchunk value. Your math is almost correct. Default max is 32GB, and your desired max is 50GB. So divide 32 by 50 = .64. Now divide 2048 by .64 = 3200. So a swchuck of 3200 will give you a swap max of 50GB.

That takes us to Dennis reply. He is correct that the system your working with will probably never be able to make use of 32GB let alone 50GB. How much is needed for swap space is driven by the amount of real memory installed and the requirements of the application being run. Rule of thumb ranges from 1 time real memory to 2 time real memory. But as memory gets huge, those can go by the wayside, and application requirements then set the target swap size.

You have 2GB of installed memory and 2GB+ of swap configured. Unless have a specific swap need for more than 1.25 time memory what you have is fine. If your used swap disk space stays at 0% or near it, you have no memory pressure and do not need more swap or real memory. Unless, of course, you have an application that calls for it. You can use glance or vmstat to monitor your swap disk usage.

Re: Swap management in HP-UX 11.23

Sreer — Tue, 07 Aug 2012 06:06:16 GMT

Hi Ken Hi Dennis,

Thanks for your replies and support.

You have cleared my concerns in swap. I will confirm Pseudo swap is enabled after increasing my Physical RAM.

Rgds

Sree

Re: Swap management in HP-UX 11.23

Dennis Handly — Tue, 07 Aug 2012 07:24:04 GMT

>I will confirm Pseudo swap is enabled

It's enabled since you have this line:

memory 2037 607 1430 30%

Re: Swap management in HP-UX 11.23

Sreer — Thu, 09 Aug 2012 16:17:59 GMT

Yes :)