topic Re: VxVM vxdisk ERROR in Operating System - HP-UX

VxVM vxdisk ERROR

KapilRaj — Wed, 13 Jun 2007 14:29:34 GMT

Hi guys,

# /etc/vx/bin/vxdisksetup -i c1t0d0
VxVM vxdisk ERROR V-5-1-3421 Device c1t0d0 is already in use by LVM.

# /etc/vx/bin/vxdisksetup -if c1t0d0
VxVM vxdisk ERROR V-5-1-3421 Device c1t0d0 is already in use by LVM.

# ls -ld /etc/lvmtab
/etc/lvmtab not found

# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c1t0d0 auto:LVM - - LVM
c1t1d0s2 auto:hpdisk rootdisk01 rootdg online

How do I initialise this disk ? I am not using this disk for LVM.

Regards,

Kaps

Re: VxVM vxdisk ERROR

Court Campbell — Wed, 13 Jun 2007 14:32:13 GMT

was the disk once used by LVM?

might try

# pvremove /dev/rdsk/c1t0d0

Re: VxVM vxdisk ERROR

KapilRaj — Wed, 13 Jun 2007 14:33:11 GMT

# pvremove /dev/rdsk/c1t0d0
pvremove: /etc/lvmtab: No such file or directory
"/etc/lvmtab" could not be read into memory.

Re: VxVM vxdisk ERROR

Sameer_Nirmal — Wed, 13 Jun 2007 14:38:35 GMT

Run

# pvcreate -f /dev/rdsk/c1t0d0

This will remove LVM header. Then use vxdisksetup to use the disk with VxVM.

Re: VxVM vxdisk ERROR

KapilRaj — Wed, 13 Jun 2007 14:40:23 GMT

I thought pvcreate will create the LVM structure on an unused disk. Are you sure ?

Regards, Kaps

Re: VxVM vxdisk ERROR

James R. Ferguson — Wed, 13 Jun 2007 14:42:23 GMT

Hi Kaps:

If you are sure that you want to erase any information on the physical disk, do:

# dd if=/dev/zero of=/dev/rdsk/c1t0d0 bs=1024k count=10

Regards!

...JRF...

Re: VxVM vxdisk ERROR

Sameer_Nirmal — Wed, 13 Jun 2007 14:59:27 GMT

Yes you are right.

The command "pvcreate" does make the disk device as "physical volume" to make it usable for LVM.

I should have given more clarification before. By running "pvcreate -f" you are removing the filesystem and LVM info like VGID etc. forcibly. Unless you get rid of this information which VxVM does check before using the disk, you can't initialise the disk under VxVM.

Re: VxVM vxdisk ERROR

KapilRaj — Wed, 13 Jun 2007 15:10:50 GMT

# pvcreate -f /dev/rdsk/c1t0d0
Creating "/etc/lvmtab".
Physical volume "/dev/rdsk/c1t0d0" has been successfully created.

# /etc/vx/bin/vxdisksetup -i c1t0d0
VxVM vxdisk ERROR V-5-1-3421 Device c1t0d0 is already in use by LVM.

# /etc/vx/bin/vxdisksetup -if c1t0d0
VxVM vxdisk ERROR V-5-1-3421 Device c1t0d0 is already in use by LVM.

I have not tried the dd option, will do if nothing works.

Regards,

Kaps

Re: VxVM vxdisk ERROR

KapilRaj — Wed, 13 Jun 2007 15:22:37 GMT

It works ...

I did a pvcreate followed by pvremove and then vxdisksetup worked.

Thanks for the help ..

Regards,

Kaps