sautil

bagek — Fri, 15 Jul 2011 17:19:54 GMT

I have a rp4440 with a smart array 6402 controller. It reports 1 disk as failed. After replacing the drive how do I change it's status to ready? Thanks.

Re: sautil

Robert_Jewell — Fri, 15 Jul 2011 20:39:16 GMT

This info should help.I found the document via a search, but the link is crazy. Search for doc ID: emr_na-c00858118-1. The title is Smart Array SA6400 - Integrity Server internal disk no automatic recovery".

Here is the info in summary:

Since the controller failed to detect the new disk, you may have to reset the controller:

# sautil /dev/cissX reset_ctlr (substitue X as required)

Start the recovery process if needed:

# sautil /dev/cissX start_recovery 

-Bob

topic sautil in Operating System - HP-UX

sautil

Re: sautil