topic Re: HP UX Boot disk required in Operating System - HP-UX

HP UX Boot disk required

valan — Tue, 28 Jun 2011 10:28:34 GMT

Hello, I am looking for a UNIX BOOT disk to buy for my box. The disk details is:

Make: HP

Part no.: 5065-5286

Firmware: HPC3

Info: 36GB hot-swap Ultra320 Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, 3.5-inch form factor, 80-pin

Can you point me that where can i get this.

Thanks.

Re: HP UX Boot disk required

Stephan_ — Tue, 28 Jun 2011 10:33:03 GMT

Hi,

check http://partsurfer.hp.com/Search.aspx?SearchText=5065-5286

hth

Stephan

Re: HP UX Boot disk required

valan — Tue, 28 Jun 2011 11:56:08 GMT

hi thanks for the link. unfortunately i can not order this using that link.

Re: HP UX Boot disk required

Stephan_ — Tue, 28 Jun 2011 12:03:52 GMT

Hi again,

due to the fact I have no glue where you are located, next try http://h20141.www2.hp.com/Hpparts/Part_Resellers.aspx?mscssid=75A24E4112204E279D22769888919691&geo_code=NA

on the left side you can choose your country to get a list of authorized parts partners.

hth,

Stephan

Re: HP UX Boot disk required

boukari — Tue, 28 Jun 2011 15:14:15 GMT

Hello,

call this number :

N° de Support Garantie : 1-800-334-5144

N° de Support Contrat : 1-800-633-3600

and say them what u want to buy,

also, check with your commercial service and they will call your HP representant in your area

Good Luck,

Re: HP UX Boot disk required

boukari — Tue, 28 Jun 2011 15:15:54 GMT

Otherwise, we dont call Boot Disk because Boot disk is just a technical Term for Os configuration, so , just tell them the reference that u want and capacity if you have part number its appreciate to accelerate process ...
Good Luck Friend,

Re: HP UX Boot disk required

Steven E. Protter — Tue, 28 Jun 2011 15:32:28 GMT

Shalom,

You can take the part number from partsurfer site or OS utilities and search ebay for the part.

I am assuming you are looking for a better price than you can get for HP.

A boot disk becomes a boot disk after it is installed and you go through a procedure to make it a boot disk.

The procedure varies depending on whether you use LVM or VxVM as your volume manager and whether your system is Itanium or PA-RISC and which version of HP-UX is installed.

SEP