topic Re: SCSI Reset error. in Operating System - HP-UX

SCSI Reset error.

Sanil raj — Tue, 05 Dec 2006 11:40:31 GMT

Hi,

My D Class 9000 server is hanging frequently,shoing SCSI reset in syslog.I am attaching the syslog file.Please guide me.

Re: SCSI Reset error.

spex — Tue, 05 Dec 2006 12:03:24 GMT

Hi,

Either bus 0 of your controller card or PV 0 attached to SCSI bus 0 has failed. You will need to replace the controller card or drive.

PCS

Re: SCSI Reset error.

Steven E. Protter — Tue, 05 Dec 2006 12:20:16 GMT

Shalom,

I'm quite familiar with the D Class servers owning two myself in jerusalem.

What has happened is some component of the i/o infrastructure has failed.

The most likley cause is a disk went bad. if multiple disks are listed then it could be a controller, cable or drive cable. The disk will need to be replaced most likely.

SEP

Re: SCSI Reset error.

Ivan Krastev — Tue, 05 Dec 2006 12:32:50 GMT

Here is some things to check from prev thread - http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=745182

regards,
ivan

Re: SCSI Reset error.

Raj D. — Wed, 06 Dec 2006 16:56:15 GMT

Hi Sanil raj,

You are getting SCSI lbolt error, looks like one of the disk is going bad,

Check you scsi termination and connections are ok, and then check the disk status.

Are you getting this error frequently , also keep an eye on the syslog error messages toget the disk device number.

hth,
Raj.