topic Change swinstall default Source Depot Path in Operating System - HP-UX

Change swinstall default Source Depot Path

Ed Hon — Mon, 29 Apr 2002 17:40:14 GMT

I can't believe something so simple is turning out to be so difficult - for me anyway. I want to change the swinstall default Source Depot Path to /tmp/PATCHES.depot . I did a "swreg -l depot /tmp/PATCHES.depot", added an entry
"swinstall.distribution_source_directory = /tmp/PATCHES.depot" to /var/adm/sw/defaults, and executed an swagentd -r , but swinstall still starts up with a source depot of /cdrom/QPK1100, the last one I used. What am I missing??

Re: Change swinstall default Source Depot Path

Helen French — Mon, 29 Apr 2002 17:52:12 GMT

Hi Ed:

Try this:

1) Edit the file /var/adm/sw/defaults file.
2) Add entry - source_directory=/tmp/PATHCES.depot

HTH,
Shiju

Re: Change swinstall default Source Depot Path

John Carr_2 — Mon, 29 Apr 2002 17:53:08 GMT

Hi

have you checked the content of the file /var/adm/sw/swreg.log to see if it registered correctly.

John

Re: Change swinstall default Source Depot Path

Helen French — Mon, 29 Apr 2002 17:55:08 GMT

Hi Ed (again):

If you want to change this for only one user, then edit the file - $HOME/.sw/defaults. The /var/adm/sw/defaults file will change the default parameter system wide.

HTH,
Shiju

Re: Change swinstall default Source Depot Path

Ed Hon — Mon, 29 Apr 2002 18:27:59 GMT

I edited the defaults file, using source_directory = /tmp/PATCHES.depot and performed a swagentd -r . It did not change the default directory. The swreg.log showed the depot was registered successfully. I am familiar with .sw/defaults for individual user accounts, but I want to make it a global default.

Re: Change swinstall default Source Depot Path

David Burgess — Mon, 29 Apr 2002 18:41:39 GMT

Change it in /var/adm/sw/defaults

Regards,

dave.

Re: Change swinstall default Source Depot Path

Helen French — Mon, 29 Apr 2002 18:45:04 GMT

Hi Ed:

For your confirmation: I just did this and it changed the default depot location. Try:

# vi /var/adm/sw/defaults

You don't need to put 'space' in between the parameter value. Add this:

source_directory=/tmp/PATHCES.depot

There is no space before or after "="

HTH,
Shiju

Re: Change swinstall default Source Depot Path

David Burgess — Mon, 29 Apr 2002 18:55:53 GMT

I just tried adding this entry to /var/adm/sw/defaults

source_directory=/software/patches/year2000/11.00/11.00_y2k-bundle

followed by /usr/sbin/swagentd -r

Ran swinstall. The source directory had changed.

Then changed it to source_directory=/software/patches/year2000/10.20/diags/depot

Again /usr/sbin/swagentd -r

Ran swinstall and the source directory had changed again.

Good luck!

Dave.

Re: Change swinstall default Source Depot Path

MANOJ SRIVASTAVA — Mon, 29 Apr 2002 19:22:35 GMT

Hi Ed

I have a primitive suggestion , try using sam and change the source to local directory ,

Manoj Srivastava

Re: Change swinstall default Source Depot Path

Ed Hon — Mon, 29 Apr 2002 20:02:40 GMT

I tried all of your suggestions, and it still doesn't work. I removed the spaces from source_directory=/tmp/PATCHES.depot in /var/adm/sw/defaults and ran /usr/sbin/swagentd -r . Also, in SAM I verified the Source Depot Type as Local Directory. Is it time to report it as a bug??

Re: Change swinstall default Source Depot Path

Helen French — Mon, 29 Apr 2002 20:16:48 GMT

Hi Ed:

Check the prmissions of the default file. Check the swagentd.log file for any errors. Apply the latest SD-UX patches to the system.

HTH,
Shiju

Re: Change swinstall default Source Depot Path

hpuxrox — Mon, 29 Apr 2002 20:26:11 GMT

I suggest installing the latest Software Distributor patch.

PHCO_25875

-Yates

Re: Change swinstall default Source Depot Path

David Burgess — Mon, 29 Apr 2002 20:28:46 GMT

Ed,

Just before you place a call try and register a new depot. Then change /var/adm/sw/defaults , run /usr/sbin/swagentd -r again and see what happens.

The permissions I have on /var/adm/sw/defaults are
-r--r--r-- 1 bin bin 1244 Apr 29 20:54 defaults

HTH

Dave.

Re: Change swinstall default Source Depot Path

Mike_305 — Mon, 29 Apr 2002 22:18:41 GMT

Hi,

I am not sure how you are creating your depot. If you use swcopy the it will copy and register the depot both at the same time. Then you can run "swlist -l depot" to see if the depot is their or not. Once you see depot run "swinstall -s /tmp/PATCHES.depot" to install patches.

I use this simple loop to create my depots. It will unsar and create depot.

*****************************************
cd /tmp
for X in PH*
do
sh $X
done
mkdir /tmp/PATCHES.depot
for X in /tmp/PH*.depot
do
swcopy -x enforce_dependencies=false -s ${X} \* @ /tmp/PATCHES.depot
done
**********************************************

Hope this helps.

THX - Mike