topic Re: Configuring Itanium disks in Operating System - HP-UX

Configuring Itanium disks

dictum9 — Fri, 02 Jun 2006 10:03:03 GMT

The procedure for Itanium Disks is much different from the regular PA-RISC machines.

Is there a guideline for using LVM on Itanium disks?

Re: Configuring Itanium disks

Pete Randall — Fri, 02 Jun 2006 10:06:43 GMT

Try this:

http://h21007.www2.hp.com/dspp/tech/tech_TechSingleTipDetailPage_IDX/1,2366,5343,00.html

Pete

Re: Configuring Itanium disks

Torsten. — Fri, 02 Jun 2006 10:09:18 GMT

The link from Pete is a good one, but I like this more:

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000082066576

The difference is the third partition for HP-utilities.

Re: Configuring Itanium disks

dictum9 — Fri, 02 Jun 2006 10:33:20 GMT

The first one says to creat /tmp/partition file:

2
EFI 100MB
HPUX 100%

The second one says to create it like this:

3
EFI 500MB
HPUX 100%
HPSP 400MB

What's the difference?

Re: Configuring Itanium disks

Torsten. — Fri, 02 Jun 2006 10:34:48 GMT

I repeat: The difference is the third partition for HP-utilities.

Re: Configuring Itanium disks

dictum9 — Fri, 02 Jun 2006 10:36:30 GMT

But what does it mean, and do I need it?

Re: Configuring Itanium disks

Torsten. — Fri, 02 Jun 2006 10:42:33 GMT

The third partition (SP = service partition) is used for Offline Diagnostics installation.

Several checks can be done with this software. It's also a good idea to create a larger first partition (500MB instead of only 100 MB), to prevent space promblems later, bacause the number of EFI utilities is growing.