https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438393#M6229 The above document doesn't deal with FC Scsi Bridge at all. Can all please read the question carefully before posting a reply. It saves lot of time for everybody.<BR /><BR />This has nothing to do with spt / sctl driver mismatch. I hope all of us are intelligent enough to understand where to include sctl and where to put spt.<BR /> Tue, 22 Aug 2000 02:33:13 GMT Sudip Hore_1 2000-08-22T02:33:13Z https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438391#M6227 As Per OmniBack 3.10 Release Notes<BR />==================================<BR />On HP-UX 10.20 &amp; 11.0 the device detection may not work for library robotics device connected over fibre channel [ Fibre Channek SCSI Bridge ]. This is a bug in HP-UX &amp; / or ioscan that does not return the device file for such devices.<BR /><BR />Is there any workaround available yet? Tue, 22 Aug 2000 01:22:31 GMT https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438391#M6227 Sudip Hore_1 2000-08-22T01:22:31Z https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438392#M6228 refer to document ID A5205513 Tue, 22 Aug 2000 01:51:42 GMT https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438392#M6228 R D SUNDAR RAJAN 2000-08-22T01:51:42Z https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438393#M6229 The above document doesn't deal with FC Scsi Bridge at all. Can all please read the question carefully before posting a reply. It saves lot of time for everybody.<BR /><BR />This has nothing to do with spt / sctl driver mismatch. I hope all of us are intelligent enough to understand where to include sctl and where to put spt.<BR /> Tue, 22 Aug 2000 02:33:13 GMT https://community.hpe.com/t5/operating-system-hp-ux/library-robotic-device/m-p/2438393#M6229 Sudip Hore_1 2000-08-22T02:33:13Z