Missing Device Files from LUN Creation

CA46525 — Wed, 29 Jan 2003 18:52:46 GMT

I have a VA7400 attached through a Fibre Channel switch to an HP 9000/L2000 server. I have already built 15 LUNs including LUN 0. I just created two more LUNS or 50GB each. After LUN creation and the Secure Manager setup from within Command View SDM I ran /etc/ioscan and then insf. The insf command had not output. There were no new /dev/dsk device files created. I have tried deleting the LUNs and recreating them. The resulting /etc/ioscan and insf commands still do not create the device files for builing a volume group and logical volumes. Have you seen this before and if so what do you do to correct it?

Re: Missing Device Files from LUN Creation

CA538024 — Wed, 29 Jan 2003 19:32:48 GMT

Hi Stuart,

I recommend posting this question in the Servers - 9000 area of the ITRC forums. Here's a direct link to that site:

http://forums.itrc.hp.com/cm/CategoryHome/1,,191,00.html

Please note that the same User ID and password you use on these forums work over there as well.

Thanks!

Kathy
Forum Manager

topic Missing Device Files from LUN Creation in Operating System - HP-UX

Missing Device Files from LUN Creation

Re: Missing Device Files from LUN Creation