topic Re: LVREDUCE in Operating System - HP-UX

LVREDUCE

Ali_11 — Tue, 15 Apr 2003 11:53:39 GMT

Hi ,

I want to reduce a LV with lvreduce command.
First i reduce the lv from 13Go to 11Go , and try reduce FS with fsadm , i had an errno 16 .
After reading some docs , i saw that i must first reduce the FS , so i increase the LV to 13Go (that i had reduce ) and try again with fsadm but i have the same errno 16.

can someone help me ?

Thanks.

Re: LVREDUCE

Pete Randall — Tue, 15 Apr 2003 11:56:34 GMT

Do you have OnlineJFS? If not, then you need to backup the file system, lvreduce the lvol, newfs the file system, and restore the data.

Pete

Re: LVREDUCE

Zafar A. Mohammed_1 — Tue, 15 Apr 2003 11:58:33 GMT

Ali,

Check chapter#6 Section Managing Disks

http://docs.hp.com/hpux/pdf/B2355-90742.pdf

Thanks
Zafar

Re: LVREDUCE

Robert-Jan Goossens — Tue, 15 Apr 2003 12:02:43 GMT

Hi,

take a look at next document,

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000067342554

Regards,

Robert-Jan.

Re: LVREDUCE

Sunil Sharma_1 — Thu, 17 Apr 2003 04:36:12 GMT

Hi ,

it seems your file system is requir defragmentation before going ahead.
You can use fsadm with -d option to defragment file system then you try it.
It should work ...
Sunil

Re: LVREDUCE

Sunil Sharma_1 — Thu, 17 Apr 2003 04:37:38 GMT

Hi ,

it seems your file system is requir defragmentation before going ahead.
You can use fsadm with -d option to defragment file system then you try it.
It should work ...
Sunil

Re: LVREDUCE

Sunil Sharma_1 — Thu, 17 Apr 2003 04:39:08 GMT

Hi ,

it seems your file system is requir defragmentation before going ahead.
You can use fsadm with -d option to defragment file system then you try it.
It should work ...
Sunil