https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830037#M635142 Hi,<BR /><BR />It's 30s ...<BR /><BR />Regards,<BR /><BR />Jean-Louis. Mon, 21 Oct 2002 14:27:52 GMT Jean-Louis Phelix 2002-10-21T14:27:52Z https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830035#M635140 Wich is the default value for <BR />the parameter IO timeout used by the disk driver when accessing the physical volume used in the command pvcreate ? Mon, 21 Oct 2002 14:21:51 GMT https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830035#M635140 Javier Ortiz Guajardo 2002-10-21T14:21:51Z https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830036#M635141 The default is 30 seconds and the maximum you can set to with "pvchange -t" is 300 seconds. Mon, 21 Oct 2002 14:27:46 GMT https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830036#M635141 S.K. Chan 2002-10-21T14:27:46Z https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830037#M635142 Hi,<BR /><BR />It's 30s ...<BR /><BR />Regards,<BR /><BR />Jean-Louis. Mon, 21 Oct 2002 14:27:52 GMT https://community.hpe.com/t5/operating-system-hp-ux/pvchange/m-p/2830037#M635142 Jean-Louis Phelix 2002-10-21T14:27:52Z