topic Re: Changing Volume Groups in Operating System - HP-UX

Changing Volume Groups

Ted Mulder — Mon, 12 Aug 2002 19:15:36 GMT

We've built a second workstation by cloning the disk with another system. We used the logical volume group commands (i.e. lvlnboot, lvrmboot, vgimport, vgchange, etc.). Upon completion we noticed that the / directory was under /dev/root and not /dev/vg00/lvol3. How do we change it so the / dir is under the volume group.

See attachment for our original procedures.

Re: Changing Volume Groups

James R. Ferguson — Mon, 12 Aug 2002 19:18:51 GMT

Hi Ted:

This is easy to correct:

# mv /etc/mnttab /etc/mnttab.old
# mount -a

Regards!

...JRF...

Re: Changing Volume Groups

A. Clay Stephenson — Mon, 12 Aug 2002 19:21:33 GMT

You would have been better served by using Ignite to make a 'Golden Image' with which to clone your 2nd box.

You should be able to mv /etc/lvmtab to /etc/lvmtab.old and then do a vgscan followed by a reboot.

Re: Changing Volume Groups

Martin Johnson — Mon, 12 Aug 2002 19:30:29 GMT

I agree with Clay, use Ignitge to clone the system. It is also a good test of your backup/recovery procedures.

HTH
Marty

Re: Changing Volume Groups

Sridhar Bhaskarla — Mon, 12 Aug 2002 19:38:24 GMT

Your procedure is not looking bad. Did you get any error messages when you tried to import vg00?. You might be trying to boot a disk that was one of a mirror pair. If so, You will need to make sure the mirrors are reduced. Use lvdisplay with -k option, determine the PV id and use lvremove command with -k option to remove the lvs. It takes a long time.

Otherwise, follow Clay's process.

-Sri

Re: Changing Volume Groups

James R. Ferguson — Mon, 12 Aug 2002 19:45:30 GMT

Hi (again) Ted:

The appearance of the mount point for the root directory (/) as '/dev/root' is known to be triggered by entering LVM maintenance mode.

Make sure that your '/etc/fstab' has the correct mountpoint; remove or rename '/etc/mnttab' as I suggested; and issue a mount all ('mount -a'). Your problem should disappear.

Regards!

...JRF...

Re: Changing Volume Groups

Sajid_1 — Mon, 12 Aug 2002 19:47:34 GMT

hello,

# mv /etc/mnttab /etc/mnttab.old
# mount -a

this will be the best option. Regarding the procedure, it look good for me.

Re: Changing Volume Groups

Q4you — Tue, 13 Aug 2002 01:51:07 GMT

Try this ->

cp /etc/fstab /etc/fstab.org

edit fstab file

check the entry for /dev/vg00/lvol3.

Change the mount entry to

/dev/vg00/lvol3 / .. ... ...

reboot.