topic Re: Need help in LVM sample command output in Operating System - HP-UX

Need help in LVM sample command output

Nikhil_1 — Fri, 27 Sep 2002 13:15:38 GMT

Hello,

I am trying to understand the output of following commands:

vgdisplay -v
lvdisplay -v
pvdisplay -v

but I do not have a test system to work on these configurations.

I would be very grateful if someone can send me output for following cases:

1. Simple 'concat' type volume
- no RAID functionality
- a volume that spans 2 PVs (PEs from 2 PVs are just concatented to form this LV)
2. Striped volume
3. Mirrored volume
4. Mirrored volume with LE-based striping

I need to reconstruct the LE-PE mapping, so the -v option for the lvdisplay, pvdisplay commands would be really useful!

If the output is too big, could you please email it to me at nikhilimhotmail.com?

With best regards,
Nikhil

Re: Need help in LVM sample command output

Paula J Frazer-Campbell — Fri, 27 Sep 2002 13:24:49 GMT

HI

VG an LV info on a tripple mirror sent to Hotmail address

Paula

Re: Need help in LVM sample command output

Stefan Farrelly — Fri, 27 Sep 2002 13:26:20 GMT

I think here is all you wanted (attached).

Cheers,

Stefan

Re: Need help in LVM sample command output

Stefan Farrelly — Fri, 27 Sep 2002 13:29:27 GMT

oops, in my previous attachment the entry for;

Logical volume simply concatanated over multiple volumes (4) as its keeps growing!

was wrong (it was for an lvol on the distributed [striped+mirrored] lvol). Here is the correct output for a simple logical volume over multiple physical disis.

Re: Need help in LVM sample command output

Nikhil_1 — Sat, 28 Sep 2002 11:19:01 GMT

Thanks a lot! I appreciate your help!

With regards,
Nikhil