topic Re: Stack trace from a program in Operating System - HP-UX

Stack trace from a program

Canedo_1 — Wed, 20 Oct 2004 12:34:43 GMT

Hello all,

Do not know if someone already asked this before.
I would like to print a stack trace (function + source file + source line) in a program to give information on where an exception was thrown, where a signal was caught etc... I tried to use U_STACK_TRACE() function but it does not give the source file and source line (even using -g option). Is there an example of code to do such trace ?
We run HP-UX on PA-RISC and we compile 64 bits applications using aCC 3.52.

uname -r
B.11.11

Thanks for any feedback

Best regards

Joseph Canedo

Re: Stack trace from a program

Sanjay_6 — Wed, 20 Oct 2004 12:42:09 GMT

Hi Joseph,

Maybe this link from itrc would help,

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062966592

the itrc doc id is UNX1000205.

Hope this helps.

Regds

Re: Stack trace from a program

Dennis Handly — Sun, 05 Feb 2012 06:01:07 GMT

>would like to print a stack trace (function + source file + source line). I tried to use U_STACK_TRACE() but it does not give the source file and source line (even using -g option).

The Integrity version of U_STACK_TRACE() will print the source and line info, even without -g.

For PA, you will have to use -g and gdb to map hex addresses to source positions.