topic Re: How to enable largefile support on HP-UX 11.0 in Operating System - HP-UX

How to enable largefile support on HP-UX 11.0

Marcos Trinidad — Fri, 09 Nov 2001 19:35:00 GMT

Hello, I am in need of some assistance.

What is the proper procedure for enabling largefile support on a specific existing volume? Or do I have to enable this support for all volumes. Does the conversion process take long? The volume is 39GB. Do I need to make a backup and restore?

Thanks so much in advance.

-Marcos

Re: How to enable largefile support on HP-UX 11.0

Sridhar Bhaskarla — Fri, 09 Nov 2001 19:38:47 GMT

Marcos,

If you don't have OnlineJFS installed, you need to recreate the logical volume using -l option. If you have OnlineJFS, you can easily do it by using the command

#fsadm -o largefiles /mount_point

-Sri

Re: How to enable largefile support on HP-UX 11.0

Uday_S_Ankolekar — Fri, 09 Nov 2001 19:42:21 GMT

Hi,

You can use fsadm for largefile support

fsadm -F filetype (ex:hfs) -o largefiles /dev/vgnn/lvolnn

If you have online JFS then you need to run above command

Goodluck
-USA..

Re: How to enable largefile support on HP-UX 11.0

Sanjay_6 — Fri, 09 Nov 2001 19:47:33 GMT

Hi Marcos,

Take a look at the thread below,

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90742/B2355-90742_top.html&con=/hpux/onlinedocs/B2355-90742/00/00/49-con.html&toc=/hpux/onlinedocs/B2355-90742/00/00/49-toc.html&searchterms=largefiles&queryid=20011109-114818

Look for "Examples and Cookbook Procedures " --> Creating a Large-Files File System

Hope this helps.

Regds

Re: How to enable largefile support on HP-UX 11.0

Sridhar Bhaskarla — Fri, 09 Nov 2001 19:49:31 GMT

Oops..my message was not very clear.. dunno where my mind was... You need to specify -o largefiles while creating the file system.

#newfs -F vxfs -o largefiles /dev/vgxx/rlvolx

if you don't have OnlineJFS.

-Sri

Re: How to enable largefile support on HP-UX 11.0

Marcos Trinidad — Fri, 09 Nov 2001 19:55:31 GMT

Unfortunately I don't have OnlineJFS, however I am considering purchasing it. Is it as easy as purchasing OnlineJFS and then running the #fsadm -o largefiles /mount_point?

-Marcos

Re: How to enable largefile support on HP-UX 11.0

Sridhar Bhaskarla — Fri, 09 Nov 2001 19:56:51 GMT

Yes it is.. But you need to reboot the system after installing OnlineJFS.

-Sri

Re: How to enable largefile support on HP-UX 11.0

Sanjay_6 — Fri, 09 Nov 2001 20:01:28 GMT

Hi Marcos,

Even if you don't have onlineJFS you can add the largefiles support to your logical volumes. If you have already created the lv, proceed like this,

fsadm -F vxfs /dev/vg_name/lv_name

Substitute vxfs with hfs, if you have hfs filesystems.The above command should return
nomultifilesets
nolargefiles

If it returns no largefiles, to add largefiles support,

umount /dev/vg_name/lv_name
fsadm -F vxfs -o largefiles /dev/vg_name/lv_name

Next modify the /etc/fstab file and add the option largefiles to the list of vxfs options so that the next time the filesystem gets mounted, it will be mounted with the largefiles enabled.

hope this helps.

Regds

Re: How to enable largefile support on HP-UX 11.0

James R. Ferguson — Fri, 09 Nov 2001 20:05:15 GMT

Hi:

To enable largefile support on an *existing* filesystem you will only need to unmount the filesystem if you do not have Online JFS and/or the filesystem isn't VxFS. To enable the support, use the raw device file:

# fsadm -F vxfs -o largefiles /dev/vgXX/rlvolY

The conversion takes just a few seconds.

To see if largefiles support is enabled or disabled for a filesystem, do:

# fsadm -F vsfs /mountpoint

The "HP-UX Large Files" whitepaper can be found here:

http://docs.hp.com/hpux/onlinedocs/os/lgfiles4.pdf

Regards!

...JRF...

Re: How to enable largefile support on HP-UX 11.0

James R. Ferguson — Fri, 09 Nov 2001 20:10:41 GMT

Hi Marcos:

It is not absolutely necessary to add the 'largefiles' option to /etc/fstab to be able to mount a largefiles-enabled filesystem. See the discusssion of mount options and mount protection in the white paper I cited, above.

Regards!

...JRF...

Re: How to enable largefile support on HP-UX 11.0

IT Response — Fri, 09 Nov 2001 20:41:14 GMT

You don't needd Online JFS installed to do this.

Here's the syntax :

umount /
/usr/sbin/fsadm -F hfs -o largefiles /dev/vgxx/rlvolx
mount /

Re: How to enable largefile support on HP-UX 11.0

IT Response — Fri, 09 Nov 2001 20:43:33 GMT

Correction:

The mount command should have read:

mount -F hfs -o largefiles /dev/vgxx/lvolx /mountpoint

...and do not forget to add the "largefiles" mount option in /etc/fstab.