topic Re: lvextend says 'lvol too large' in Operating System - HP-UX

lvextend says 'lvol too large'

Brad Marks — Thu, 10 Jan 2002 19:33:21 GMT

Howdy guys 'n' gals,
I'm trying to reduce the size of /dev/vg00/lvol9 from 1gb. 100mb. Here's what it looks like via bdf: /dev/vg00/lvol9 1024000 28297 933533 3% /usr2

When I execute "lvreduce -L 100 /dev/vg00/lvol9" I get the following error msg: "Warning: The Logical Volume has a file system larger than the reduced size.
Reducing the Logical Volume will cause filesystem corruption.
When a logical volume is reduced useful data might get lost"
Since I've a backup of the lvol, can I safely ignore this erroneous error?

Thanx in advance,
Brad

Re: lvextend says 'lvol too large'

Brad Marks — Thu, 10 Jan 2002 19:36:46 GMT

By the way, I meant to say that I'm reducing from 1g. TO 100mb.
Thanx

Re: lvextend says 'lvol too large'

Sanjay_6 — Thu, 10 Jan 2002 19:38:47 GMT

Hi Brad,

If you have backed up the existing data on the lv, it would be good for you to remove the lv complete using "lvremove" and then add another lv using "lvcreate" rather than reducing the size of an existing LV. We normally use lvreduce to reduce the mirror and such and not to reduce the lv size.

Hope this helps.

Regds

Re: lvextend says 'lvol too large'

Sridhar Bhaskarla — Thu, 10 Jan 2002 19:39:02 GMT

Hi Brad,

Though the used up space is on 28MB, lvreduce always warns us due to the fragmentation of the file system.

**It is not advised to reduce the file system without using OnlineJFS****

If you have OnlineJFS, you can do

#fsadm -b 102400 /usr1
#lvreduce -L 100 /dev/vg00/lvol9

will take care of your business

If you don't have OnlineJFS, I would suggest to backup the 28MB to another file system temporarly, destroy lvol9 and recreate it with 100MB and then copy the data back. This is the safest procedure.

-Sri

Re: lvextend says 'lvol too large'

Joseph C. Denman — Thu, 10 Jan 2002 19:40:55 GMT

I would normally remove the lvol and recreate it. Gives me the warm fuzzy to newfs. However, you should not have a problem. Use the -f option.

...jcd...

Re: lvextend says 'lvol too large'

Sanjay_6 — Thu, 10 Jan 2002 19:40:56 GMT

Hi Brad,

you should still be able to reduce the size of the LV if you want. If you are getting errors check the patch level on your system. you may be in need of some LVM patches.

Hope this helps.

Regds

Re: lvextend says 'lvol too large'

Helen French — Thu, 10 Jan 2002 19:41:47 GMT

Hi,

As far as you have the data backup, you can reduce the LV. You need to create file system after you reduce the LV and then copy back the data.

My suggestion is to remove the entire LV (lvremove) and recreate the new LV with 100 MB, create new FS and copy back the data.

HTH,
Shiju

Re: lvextend says 'lvol too large'

James R. Ferguson — Thu, 10 Jan 2002 19:42:13 GMT

Hi Brad:

You need to restore the filesystem's data on the logical volume you 'lvreduce'. The warning message is meant as a reminder to you!

Regards!

...JRF...

Re: lvextend says 'lvol too large'

James R. Ferguson — Thu, 10 Jan 2002 19:46:49 GMT

Hi (again) Brad:

I should hasten to add that (having backed up the data you wish to keep), 'lvreduce' the logical volume and *then* create a new smaller filesystem with 'newfs' before reloading your data.

Regards!

...JRF...

Re: lvextend says 'lvol too large'

Uday_S_Ankolekar — Thu, 10 Jan 2002 19:49:01 GMT

Hi
If you have online JFS then below is the step for Lvreduce

Reducing an HP OnlineJFS File System

fsadm -F vxfs -b [lv_size_MB]M /mountdirectory

NOTE: You need to add M directly to the lv_size_MB.

Reduce the logical volume to the needed size:

# lvreduce -L [lv_size_MB] /dev/vg01/lvol5

Check the size of the reduced file system:

# bdf

To reduce the size of a logical volume without online JFS (advanced JFS)
Note: the following example is using the volume group vg01 and the logical volume lvhome
1) Backup all user data
2) Umount the filesystem
umount /home
3) Reduce the size
lvreduce -L 60 /dev/vg01/lvhome
Note: the new total size will be 60M.
4) Re-create the filesystem
newfs -F vxfs /dev/vg01/rlvhome
Note: to create an hfs filesystem change vxfs by
hfs in the previous command.
5) Mount the Logical Volume:
mount /dev/vg01/lvhome /home
6) Restore the user data

-USA..