https://community.hpe.com/t5/operating-system-hp-ux/can-i-setup-an-alternate-paths-for-disks-in-this-setup/m-p/2513781#M648337 Yes - but you don't need to cascade your hubs as you have in the attached diagram - as long as both your servers has a connection to both hubs, and both hubs are connected to the FC60. I don't think connecting both hubs together will give you anything extra.<BR /><BR /><BR /> Thu, 05 Apr 2001 06:20:36 GMT Duncan Edmonstone 2001-04-05T06:20:36Z https://community.hpe.com/t5/operating-system-hp-ux/can-i-setup-an-alternate-paths-for-disks-in-this-setup/m-p/2513780#M648336 The attachment is a schematic representation of the proposed setup. We intend to connect two servers, both connected to the same FC60, with 6 sc10 Enclosures, running on Full Bus Mode. Each enclosure houses about 6 <BR />73 GB disk drives. Both the servers would run different applications and Luns are created for them with mirroring and RAID 5.<BR /><BR />Server 1 connects to the HUB1, which is directly connected to the Controller A. We are also using disks on Controller B. <BR /><BR />the question in hand is, if Fibre Cable 1 fails, will we be able to lookup for the disks pertaining to that, via HUB2, since both the HUBs are cascaded? Can I setup an alternate path in the LVM via HUB2 for the Luns that I created?<BR /><BR />Thanks in advance for your time and valuable suggestions,<BR /><BR />Anu Mathew Wed, 04 Apr 2001 23:53:29 GMT https://community.hpe.com/t5/operating-system-hp-ux/can-i-setup-an-alternate-paths-for-disks-in-this-setup/m-p/2513780#M648336 Anu Mathew 2001-04-04T23:53:29Z https://community.hpe.com/t5/operating-system-hp-ux/can-i-setup-an-alternate-paths-for-disks-in-this-setup/m-p/2513781#M648337 Yes - but you don't need to cascade your hubs as you have in the attached diagram - as long as both your servers has a connection to both hubs, and both hubs are connected to the FC60. I don't think connecting both hubs together will give you anything extra.<BR /><BR /><BR /> Thu, 05 Apr 2001 06:20:36 GMT https://community.hpe.com/t5/operating-system-hp-ux/can-i-setup-an-alternate-paths-for-disks-in-this-setup/m-p/2513781#M648337 Duncan Edmonstone 2001-04-05T06:20:36Z