topic Re: Mirroring problems after Upgrade in Operating System - HP-UX

Mirroring problems after Upgrade

Troyan Krastev — Fri, 18 May 2001 12:31:00 GMT

Hi all,

I updated my OS from HP-UX10.20 to HP-UX11.00.
My vg00 was mirrored, and mirroring was preserved, but when I try to mirror another VG it says that ??m? option is not recognized. The Mirroring product for HP-UX 10.20 is still on the system.
The question: Do I need to install Mirroring software for HP-UX 11.00 and do I have to remove the old one for HP-UX 10.20 in order to use Mirroring?

Thanks,
Troy.

Re: Mirroring problems after Upgrade

Vincenzo Restuccia — Fri, 18 May 2001 12:36:33 GMT

Yes,MIRROR UX 10.20 is different of MIRROR UX 11.00.

Re: Mirroring problems after Upgrade

melvyn burnard — Fri, 18 May 2001 12:37:35 GMT

Yes you HAVE to upgrade the mirroring product for version 11 of HP-UX.

Re: Mirroring problems after Upgrade

Troyan Krastev — Fri, 18 May 2001 12:39:46 GMT

Do I have to remove MIRROR UX 10.20 before installing new one?

Re: Mirroring problems after Upgrade

melvyn burnard — Fri, 18 May 2001 14:21:14 GMT

No, just upgrade it with the newer version for 11.x

Re: Mirroring problems after Upgrade

Pedro Sousa — Fri, 18 May 2001 14:27:28 GMT

Hi Troyan!
It would be cleaner if you had made a cold installation...
In your case, you need to upgrade every product relating HPUX 10.20 to 11, like OnlineJFS, MeasureWare, Perfview, ...
good luck.
I think you only need to upgrade it.