topic Re: getpid: peer died: Error 0 in Operating System - HP-UX

getpid: peer died: Error 0

Khalid Shakoor — Mon, 02 Feb 2009 05:00:26 GMT

Hi Guruz,

One of my client facing unexpected cluster lock Queries error in lock disk,The issue was the path was change on one of my node then we updated the vglock configuration and compile the binary again and run the cluster again,Cluster was up running and we tested also fail over,Every thing is working fine and there is no more message unexpected cluster lock Queries.

Now after finish that job on same server we continuously received telnetd[7481]: getpid: peer died: Error 0 message in syslog and interval is 5 min,

I really appreciated if some body help me to resolved that issue.

Regards
Khalid

Re: getpid: peer died: Error 0

Asif Sharif — Mon, 02 Feb 2009 07:56:36 GMT

Salam Khalid,

What is patch level of your machine, install the latest QPK.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=122921
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1233561347825+28353475&threadId=501458

Regards,
Asif Sharif

Re: getpid: peer died: Error 0

Laurent Menase — Mon, 02 Feb 2009 10:08:26 GMT

Usually this is due to telnet sessions aborted by a reset - or syn/reset attack/tests.
- it can be due to a duplicate ip, the other system reseting the connection
- it can be due to a vulnerability scanner.

So the best is to take an nettl trace at interface layer, and check patch revision
- with some very old 11.11 or 11.23 ARPA patch version, we may get read() returning 0.

Re: getpid: peer died: Error 0

Khalid Shakoor — Sun, 27 Dec 2009 08:18:11 GMT

Thanks.