topic dm-chassis error 200 in Operating System - HP-UX

dm-chassis error 200

Noel Daniel — Fri, 02 Oct 2009 03:10:12 GMT

I've recieved the following error via EMS. Could someone who has exerienced this before educate me on what exactly has happened, and also the corrective action needed.

====================================

Event Time..........: Thu Oct 1 11:30:14 2009
Severity............: MAJORWARNING
Monitor.............: dm_chassis
Event #.............: 200
System..............:

Summary:
The chassis code logging daemon (cclogd) is not currently running.

Description of Error:

The chassis code logging daemon supplies all the chassis logs monitored by
dm_chassis. Cclogd must be running for dm_chassis to get the system chassis
codes.

Probable Cause / Recommended Action:

This chassis code logging daemon has been shut-down.
To re-start cclogd, run cstm as root. If diagmond is not running,
issue the command
cstm>stmstartup

If diagmond is running, issue the command
cstm>daemonstartup

From the list, select "cclogd".
=====================================

Re: dm-chassis error 200

Torsten. — Fri, 02 Oct 2009 08:30:29 GMT

Did you do the suggested steps yet?

Also check if your version is up to date!

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Re: dm-chassis error 200

Noel Daniel — Tue, 19 Jan 2010 11:01:02 GMT

Torsten,

The daemon restarts as per instructions.

But it has recurred after a lapse of over 3 months, today. Is this caused due to any known issue such as FW versions etc. ?

Re: dm-chassis error 200

Torsten. — Tue, 19 Jan 2010 15:22:47 GMT

First I would check if the version is up2date.