topic booting HPUX Problem .... Configuring PPP Interface .............. in Operating System - HP-UX

booting HPUX Problem .... Configuring PPP Interface ..............

Vinayak_HPUX — Tue, 16 Sep 2008 09:19:08 GMT

I have installed HPUX-11.23 Os on PA machine
whenever its starts it got stucked at below messages on console:
I able to telnet the same m/c from there I used to grep pid of pppd deamon & used to kill the pid of pppd deamon to access the console of m/c.

Start dynamic routing daemon ............ N/A
Start router discover protocol daemon ... N/A
Configuring PPP Interface ............

As soon as I kills pid of pppd deamon from telnet console messages moves ahead & console comes in use.

Re: booting HPUX Problem .... Configuring PPP Interface ..............

Steven E. Protter — Tue, 16 Sep 2008 09:28:31 GMT

Shalom,

Use sam to clear out and if necessary reconfigure the ppp interface after system start.

Then boot it again.

If the problem persists, check your system patch level, perhaps install the latest QPK as a starting point.

Also, check the physical hardware and make sure the modem isn't the problem.

SEP

Re: booting HPUX Problem .... Configuring PPP Interface ..............

Vinayak_HPUX — Mon, 31 Aug 2009 05:35:53 GMT

I got the solutions