topic Re: SSH for HP-UX 11.00 in Operating System - HP-UX

SSH for HP-UX 11.00

Charlie123 — Wed, 08 Apr 2009 02:27:25 GMT

Hi all,

I downloaded T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot

Here is my output, can anyone help?
Thanks a lot.

Charlie
---------------------------------------

awagshp 25 [/tmp/hp_ssh] #swlist -d -s ./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot
# Initializing...
# Contacting target
"./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot"...
ERROR: Could not contact host
"./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot". Make sure
the hostname is correct.
ERROR: More information may be found in the daemon logfile on this
target (default location is
./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot:/var/adm/sw/swagentd.log).

awagshp 26 [/tmp/hp_ssh] #swlist -s ./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot T1471AA
# Initializing...
# Contacting target
"./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot"...
ERROR: Could not contact host
"./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot". Make sure
the hostname is correct.
ERROR: More information may be found in the daemon logfile on this
target (default location is
./T1471AA_A.05.10.045_HP-UX_B.11.11_32_64.depot:/var/adm/sw/swagentd.log).

awagshp 27 [/tmp/hp_ssh] #uname -a
HP-UX awagshp B.11.00 E 9000/803 2008924973 8-user license
awagshp 28 [/tmp/hp_ssh] #

Then I downloaded SSH from here:
http://mirrors.develooper.com/hpux/downloads.html#hpux1100
As my host does not have bzip2, then I downloaded it as well. I run bzip2 it complained:
awagshp 86 [/tmp/hp_ssh] #bzip2
bzip2: Executable file incompatible with hardware.
awagshp 87 [/tmp/hp_ssh] #

Can any one direct me a clear way to set up SSH service in my old HP-UX 11.00?

Thanks a lot.

Charlie

Re: SSH for HP-UX 11.00

Patrick Wallek — Wed, 08 Apr 2009 02:38:55 GMT

The 11.11 version of SSH will NOT run on 11.0.

Go here:

http://mirrors.develooper.com/hpux/downloads.html

And look in the 11.0 section. You will see OpenSSH available for download there.

Re: SSH for HP-UX 11.00

Charlie123 — Wed, 08 Apr 2009 02:48:05 GMT

Thanks Patric.
I downloaded openssh-5.1p1-11.00.sd.bz from where you directed, and downloaded bzip2-1.0.2-pa2.0 as well. I renamed it to bzip2, when I run bzip2, it complained the hardware incompatible.

Any further help?

Thanks a lot.
Charlie

Re: SSH for HP-UX 11.00

Patrick Wallek — Wed, 08 Apr 2009 02:55:50 GMT

What kind of hardware do you have?

What does the 'model' command return?

The version of 'bzip' you downloaded was built for a PA-RISC 2.0 architecture server.

It is possible you have a PA-RISC 1.1 server. Try downloading the version of bzip listed in the 10.20 category and see if that will work.

Re: SSH for HP-UX 11.00

Charlie123 — Wed, 08 Apr 2009 04:02:00 GMT

Hi Patric,

I used bzip2-1.0.2-pa1.1 ( for 10.20 ) on 11.00, it seemed OK. Then I tried installation but failed.

Look at these steps:

1:)
./bzip2-1.0.2-pa1.1 -d openssh-5.1p1-11.00.sd.bz
( The above cmd OK, I got openssh-5.1p1-11.00.sd )

2:)
swinstall -s ./openssh-5.1p1-11.00.sd

( I got:
a:) Checking CD-ROM ....
b:)
Could not contact host "./openssh-5.1p1-11.00.sd". Make sure the â â
â â â â â â hostname is correct.

3:)
awagshp 16 [/tmp/hp_ssh] #model
9000/803/D220
Is it PAR-RISC 1.1 or 2.0, I do not know.

Any clue?
Thanks a lot.
Charlie

Re: SSH for HP-UX 11.00

smatador — Wed, 08 Apr 2009 07:04:33 GMT

Hi,
Check first with this thread to resolve the host
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=22872
restart with swagentd -r, you swagent daemon
and another idea, assuming you openssh depot is in /tmp, try swinstall -s /tmp/openssh.xxx
Hope it helps to install openssh.

Re: SSH for HP-UX 11.00

Charlie123 — Thu, 09 Apr 2009 00:34:20 GMT

Hi smatador,
Thanks for reply.

I did the following:
1:)
awagshp 61 [/etc] #nslookup awagshp
Using /etc/hosts on: awagshp

Name: awagshp
Address: 10.2.240.31

hosts file entries are fine.

2:)
/etc/nsswitch.conf gave me this:
hosts: files nis dns

4:) file /etc/rc.config.d/netconf has this entry:
HOSTNAME=awagshp

3:) I did this:
awagshp 65 [/etc] #/usr/sbin/swagentd -r
awagshp 66 [/etc] #

4:) I still got these:
awagshp 10 [/tmp/hp_ssh] #swinstall -s ./openssh-5.1p1-11.00.sd openssh

======= 04/09/09 10:04:34 EST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@awagshp".

* Beginning Selection
* Target connection succeeded for "awagshp:/".
ERROR: Could not contact host "./openssh-5.1p1-11.00.sd". Make sure
the hostname is correct.
* Source connection failed for
"./openssh-5.1p1-11.00.sd:/var/spool/sw".
WARNING: More information may be found in the daemon logfile on this
target (default location is
./openssh-5.1p1-11.00.sd:/var/adm/sw/swagentd.log).
* Selection had errors.

======= 04/09/09 10:04:36 EST END swinstall SESSION (non-interactive)

awagshp 11 [/tmp/hp_ssh] #

I have tried a few times & still got this error. Can you help further?
Thanks a lot.
Charlie

Re: SSH for HP-UX 11.00

Dennis Handly — Thu, 09 Apr 2009 01:22:48 GMT

>9000/803/D220 Is it PA-RISC 1.1 or 2.0?

Since it doesn't work, it isn't 2.0.
http://docs.hp.com/en/5992-2331/ch04s09.html
PA-7xxx D220/D230 discontinued June 1, 2000.

Re: SSH for HP-UX 11.00

Patrick Wallek — Thu, 09 Apr 2009 01:35:22 GMT

Install this way:

swinstall -s /tmp/hp_ssh/openssh-5.1p1-11.00.sd \*

Re: SSH for HP-UX 11.00

Charlie123 — Thu, 09 Apr 2009 03:15:42 GMT

Hi Patrick,

Thanks for reply.

Here is the output with your instruction.
-----------------------------------------
awagshp 76 [/tmp/hp_ssh] #swinstall -s /tmp/hp_ssh/openssh-5.1p1-11.00.sd \*

======= 04/09/09 13:15:45 EST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@awagshp".

* Beginning Selection
* Target connection succeeded for "awagshp:/".
* "awagshp:/tmp/hp_ssh/openssh-5.1p1-11.00.sd": This source is
a tape device.
* "awagshp:/tmp/hp_ssh/openssh-5.1p1-11.00.sd": Cannot open the
logfile on this target or source. Possibly the media is
read-only or there is a permission problem. Check the daemon
logfile and "/var/tmp/swagent.log" on this host for more
information.
* Source: /tmp/hp_ssh/openssh-5.1p1-11.00.sd
* Targets: awagshp:/
* Software selections:
openssh.openssh-CFG,r=5.1p1,a=HP-UX_B.11.00_PA,v=PROCURA
openssh.openssh-MAN,r=5.1p1,a=HP-UX_B.11.00_PA,v=PROCURA
openssh.openssh-RUN,r=5.1p1,a=HP-UX_B.11.00_PA,v=PROCURA
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
ERROR: "awagshp:/": The software dependencies for 1 products or
filesets cannot be resolved.
* The analysis phase failed for "awagshp:/".
* Analysis had errors.

* Beginning Execution
ERROR: "awagshp:/": 1 filesets were determined to be skipped in the
analysis phase.
* The execution phase failed for "awagshp:/".
* Execution had errors.

NOTE: More information may be found in the agent logfile (location
is awagshp:/var/adm/sw/swagent.log).

======= 04/09/09 13:16:29 EST END swinstall SESSION (non-interactive)

awagshp 77 [/tmp/hp_ssh] #
------------------------------------

It seemed to me the installation & execution both failed.

I need more help.
Thank you,
Charlie

Re: SSH for HP-UX 11.00

Steven Schweda — Thu, 09 Apr 2009 03:20:59 GMT

> NOTE: More information may be found [...]

It's hard to see from where I'm sitting.
Perhaps you could look?

Re: SSH for HP-UX 11.00

Charlie123 — Thu, 09 Apr 2009 04:23:47 GMT

Hi Steven, thanks for reply.

Here is the complete log after I tried again:
---------------------
======= 04/09/09 14:27:53 EST BEGIN install AGENT SESSION (pid=2278)
(jobid=awagshp-0254)

* Agent session started for user "root@awagshp". (pid=2278)

* Beginning Analysis Phase.
* Source: awagshp:/tmp/hp_ssh/openssh-5.1p1-11.00.sd
* Target: awagshp:/
* Target logfile: awagshp:/var/adm/sw/swagent.log
* Reading source for product information.
* Reading source for file information.
The prerequisite "openssl" for fileset
"openssh.openssh-RUN,r=5.1p1" cannot be successfully resolved.
ERROR: The dependencies for fileset "openssh.openssh-RUN,r=5.1p1"
cannot be resolved (see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to remain
unchanged.
This will leave 55087 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/usr" is estimated to
remain unchanged.
This will leave 29402 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
decrease by 1 Kbytes.
This will leave 33390 Kbytes of available user disk space
after the installation.

* Summary of Analysis Phase:
ERROR: Exclude openssh.openssh-RUN,r=5.1p1
ERROR: 1 of 3 filesets had Errors.
* 2 of 3 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.

* Beginning the Install Execution Phase.
* Filesets: 2
* Files: 18
* Kbytes: 290
* Installing fileset "openssh.openssh-CFG,r=5.1p1" (1 of 2).
* Installing fileset "openssh.openssh-MAN,r=5.1p1" (2 of 2).
* Running install clean command /usr/lbin/sw/install_clean.
NOTE: tlinstall is searching filesystem - please be patient
NOTE: Successfully completed

* Beginning the Configure Execution Phase.

* Summary of Execution Phase:
ERROR: Skipped (in analysis) openssh.openssh-RUN,r=5.1p1
ERROR: 1 of 3 filesets had Errors.
* 2 of 3 filesets had no Errors or Warnings.
ERROR: The Execution Phase had errors. See the above output for
details.

======= 04/09/09 14:28:23 EST END install AGENT SESSION (pid=2278)
(jobid=awagshp-0254)
-------------------------------

Any clue from above?

Thank you.
Charlie

Re: SSH for HP-UX 11.00

Steven Schweda — Thu, 09 Apr 2009 06:03:09 GMT

> Any clue from above?

> [...]
> The prerequisite "openssl" for fileset
> "openssh.openssh-RUN,r=5.1p1" cannot be successfully resolved.
> [...]

Apparently, you need to install OpenSSL
before you can install OpenSSH.

Re: SSH for HP-UX 11.00

H.Merijn Brand (procura — Thu, 09 Apr 2009 10:55:07 GMT

FYI, I just uploaded OpenSSL-0.9.8k + OpenSSH-5.2p1
Including the versions for HP-UX 10.20, which should be useable for 11.00 with PA7xxx CPU

The 11.00 builds are 32bit builds for PA-RISC2.0, so they won't run on your system.

Enjoy, Have FUN! H.Merijn

Re: SSH for HP-UX 11.00

H.Merijn Brand (procura — Thu, 09 Apr 2009 12:26:39 GMT

I couldn't resist the temptation again. Sorry

Would you be willing to try

http://www.cmve.net/~mbrand/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd.bz

It is built with +DAportable, so should run on your PA7xxx

Please do not forget to assign points :)

Enjoy, Have FUN! H.Merijn

Re: SSH for HP-UX 11.00

Torsten. — Thu, 09 Apr 2009 12:30:50 GMT

procura, you are too kind for this world ...

;-))

Re: SSH for HP-UX 11.00

H.Merijn Brand (procura — Thu, 09 Apr 2009 12:38:20 GMT

Well, this day I had to build those two for 9 systems anyway, so one more configuration could be added.

I hope I did it right though, because I used a different intermediate folder in order not to conflict with the build system itself, which is still a production box.

And HP-UX is sooooooo much easier and faster to do than those AIX machines! We hates those we hates those.

BTW, that distro also includes a libz-1.2.3.sl (and a symlink to it) as I didn't have a PA-1.1 version handy.

Enjoy, Have FUN! H.Merijn

Re: SSH for HP-UX 11.00

Charlie123 — Tue, 21 Apr 2009 00:18:43 GMT

Hi Procura,

Thanks for the reply.

I downloaded/unzipped your package and tried but got this:

awagshp 10 [/tmp/hp_ssh] #swinstall -s ./openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd openssh

======= 04/21/09 10:20:56 EST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@awagshp".

* Beginning Selection
* Target connection succeeded for "awagshp:/".
ERROR: Could not contact host
"./openssl-0.9.8k+openssh-5.2p1-11.00-pa1.s". Make sure the
hostname is correct.
* Source connection failed for
"./openssl-0.9.8k+openssh-5.2p1-11.00-pa1.s:/var/spool/sw".
WARNING: More information may be found in the daemon logfile on this
target (default location is
./openssl-0.9.8k+openssh-5.2p1-11.00-pa1.s:/var/adm/sw/swagentd.log).

* Selection had errors.

======= 04/21/09 10:20:58 EST END swinstall SESSION (non-interactive)

awagshp 11 [/tmp/hp_ssh] #

Output from /var/adm/sw/swagentd.log:

* Started install agent on "/" for root@awagshp, pid=3897,
04/21/09 10:20:56 EST
* Agent pid=3897 completed. 04/21/09 10:20:58 EST
~

Not sure what I did wrong, can you help further?
Thanks a lot.

Charlie

Re: SSH for HP-UX 11.00

Dennis Handly — Tue, 21 Apr 2009 02:44:00 GMT

>Not sure what I did wrong, can you help further?

You need an absolute path:
swinstall -s $PWD/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd openssh

Re: SSH for HP-UX 11.00

Charlie123 — Tue, 21 Apr 2009 04:04:53 GMT

Hi Dennis,
Thanks for reply.

Here is my installation after I used full path:

awagshp 5 [/tmp/hp_ssh] #swinstall -s /tmp/hp_ssh/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd openssh

======= 04/21/09 14:03:23 EST BEGIN swinstall SESSION
(non-interactive)

* Session started for user "root@awagshp".

* Beginning Selection
* Target connection succeeded for "awagshp:/".
*
"awagshp:/tmp/hp_ssh/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd":
This source is a tape device.
*
"awagshp:/tmp/hp_ssh/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd":
Cannot open the logfile on this target or source. Possibly
the media is read-only or there is a permission problem.
Check the daemon logfile and "/var/tmp/swagent.log" on this
host for more information.
* Source:
/tmp/hp_ssh/openssl-0.9.8k+openssh-5.2p1-11.00-pa1.sd
* Targets: awagshp:/
* Software selections:
openssh.openssh-CFG,r=5.2p1,a=HP-UX_B.11.00_PA,v=PROCURA
openssh.openssh-MAN,r=5.2p1,a=HP-UX_B.11.00_PA,v=PROCURA
openssh.openssh-RUN,r=5.2p1,a=HP-UX_B.11.00_PA,v=PROCURA
+ openssl.openssl-CFG,r=0.9.8k,a=HP-UX_B.11.00_PA,v=PROCURA
+ openssl.openssl-INC,r=0.9.8k,a=HP-UX_B.11.00_PA,v=PROCURA
+ openssl.openssl-MAN,r=0.9.8k,a=HP-UX_B.11.00_PA,v=PROCURA
+ openssl.openssl-RUN,r=0.9.8k,a=HP-UX_B.11.00_PA,v=PROCURA
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a reference bundle.
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* The analysis phase succeeded for "awagshp:/".
* Analysis succeeded.

* Beginning Execution
* The execution phase succeeded for "awagshp:/".
* Execution succeeded.

NOTE: More information may be found in the agent logfile (location
is awagshp:/var/adm/sw/swagent.log).

======= 04/21/09 14:04:35 EST END swinstall SESSION (non-interactive)

awagshp 6 [/tmp/hp_ssh] #
--------------------------------------------

It seemed that the installation & execution was OK at this stage ( great leap ) except the installation log file was a problem, hopefully this is not a problem at all.

When I tried to use a SSH client to access the host I got "Connection Refused" error.

Please indicate what next I should do to make SSH work.

Thanks a lot.

Charlie