topic Disk Array Model 10 - D350 in Operating System - HP-UX

Disk Array Model 10 - D350

Joell — Thu, 02 Nov 2000 16:12:47 GMT

Hello!

I have a D350 Server, I use this server to develop some applications, but I need to increase the disk area, I have a Disk array Model 10 whit 6 disk of 4gb each one,

Can I connect this disk array on D350 server?this server have a SE SCSI port available. And if this is posible, is necesary install some patch's??

I know to this disk array are very old, but need to save money.

Tnks!.

Re: Disk Array Model 10 - D350

Lasse Knudsen — Thu, 02 Nov 2000 16:20:01 GMT

I do not know the "Disk Array Model 10" but if it contains single ended disks there should be no problem in doing it. No special patches needed.

Re: Disk Array Model 10 - D350

Stefan Farrelly — Thu, 02 Nov 2000 16:40:17 GMT

You should have no problem connecting a Model 10 (Nike) array to your D class. Just ensure you have a late GR patch bundle loaded, this should take care of all driver/possible problems.

Re: Disk Array Model 10 - D350

Anonymous — Mon, 06 Nov 2000 16:18:07 GMT

Hi Joell,

indeed, a A3231A Nike Model 10 contains SE disks BUT this SE scsi bus is a disk array internal one.

To connect it to a server you need a SCSI FW card- no problem, since a D350 has at least one (used for it's hot swap bay).

Patches: it's just a new FW scsi disk- I'm not aware of any special patch.
HTH
Thomas