https://community.hpe.com/t5/operating-system-hp-ux/partial-startup-maintenance-mode/m-p/5418451#M658060 <P>The MC/SG documentation talks about this.</P><P>&nbsp;</P><P>Managing Serviceguard Twentieth Edition</P><P><A target="_blank" href="http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02985067/c02985067.pdf">http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02985067/c02985067.pdf</A></P><P>&nbsp;</P><P>It talks about Maintenance Mode and Partial Startup Maintenance Mode on page 287.</P> Wed, 14 Dec 2011 21:54:41 GMT Patrick Wallek 2011-12-14T21:54:41Z https://community.hpe.com/t5/operating-system-hp-ux/partial-startup-maintenance-mode/m-p/5418435#M658059 <P>Hi All.</P><P>&nbsp;</P><P>On Service Guard A.11.20 one of my package has started in Partial - Startup maintenance mode with exclusive of IP &amp; external scripts module.&nbsp;</P><P>&nbsp;</P><P>After the package startup i could only see the status as Maintenance mode and i dont see any option to find what all module was started and what all modules was excluded.&nbsp;</P><P>&nbsp;</P><P>Is there any way to verify the same?</P> Wed, 14 Dec 2011 21:28:41 GMT https://community.hpe.com/t5/operating-system-hp-ux/partial-startup-maintenance-mode/m-p/5418435#M658059 Guna_2 2011-12-14T21:28:41Z https://community.hpe.com/t5/operating-system-hp-ux/partial-startup-maintenance-mode/m-p/5418451#M658060 <P>The MC/SG documentation talks about this.</P><P>&nbsp;</P><P>Managing Serviceguard Twentieth Edition</P><P><A target="_blank" href="http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02985067/c02985067.pdf">http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02985067/c02985067.pdf</A></P><P>&nbsp;</P><P>It talks about Maintenance Mode and Partial Startup Maintenance Mode on page 287.</P> Wed, 14 Dec 2011 21:54:41 GMT https://community.hpe.com/t5/operating-system-hp-ux/partial-startup-maintenance-mode/m-p/5418451#M658060 Patrick Wallek 2011-12-14T21:54:41Z