topic Re: Secure Shell (ssh2) install on 11.0 in Operating System - HP-UX

Secure Shell (ssh2) install on 11.0

Stephen Sneeringer — Wed, 23 Aug 2000 14:42:53 GMT

Do I have to use only the HP C / ANSI C compiler for this package. I've tried using /usr/bin/cc with no success.

Re: Secure Shell (ssh2) install on 11.0

Vikas Khator — Wed, 23 Aug 2000 14:47:25 GMT

We tried using gcc but issues with make . had problems like unresolved symbol ..

So best bet would be aCC. Though not sure if that would work either. please let us know.

Re: Secure Shell (ssh2) install on 11.0

Darren Miller — Wed, 23 Aug 2000 21:55:19 GMT

Hello!

I've compiled ssh2 (commercial version 2.1.0) using HP's C-ANSI-C compiler and haven't had any trouble.

After unzipping and untarring, I did the following:

./configure -prefix /opt/ssh2
mkdir /opt/ssh2
make
make install
/opt/ssh2/sbin/sshd2

As I recall, there is a FastStart (?) document of some sort that clearly described the procedure required to enable user authentication and some of the other features.

Re: Secure Shell (ssh2) install on 11.0

Anthony Goonetilleke — Wed, 23 Aug 2000 22:34:05 GMT

You can compile it with gcc just get the latest version of that as well as binutils. I didnt have too many problems.

Re: Secure Shell (ssh2) install on 11.0

Madanagopalan S — Thu, 24 Aug 2000 00:51:15 GMT

I did the following on my machine .

tar zxvf ssh-2.2.x.tar.gz

./configure
make
make install

ansic is already installed on our server.

Re: Secure Shell (ssh2) install on 11.0

Andre Meeuwesen — Thu, 24 Aug 2000 05:42:20 GMT

get gcc http://hpux.cs.utah.edu/ftp/hpux/Gnu/gcc-2.95.2/gcc-2.95.2-sd-11.00.depot.gz
source and 10.20 also available
get ssh
http://the.wiretapped.net/security/cryptography/ssh/SSH/ssh-2.2.0.tar.gz
get client ssh
http://the.wiretapped.net/security/cryptography/ssh/SSH/SSHWin-2.2.0.exe
good luck

Re: Secure Shell (ssh2) install on 11.0

Michael Dun_1 — Thu, 24 Aug 2000 13:13:59 GMT

The reason you had problems with cc is it's really only used for recompiling the kernel - it's practically useless for anything else!

Re: Secure Shell (ssh2) install on 11.0

Stephen Sneeringer — Thu, 24 Aug 2000 16:50:06 GMT

Well heres where I'm at....
I've gotten the gcc compiler and other related packages. Now when I try to run the configure file it keeps grabing the cc compiler. I've try setting varables like CC=gcc and GCC=gcc. I've put the opt/gcc/bin & /opt/binutils at the head of the PATH variable. All of this has been to no avail. I looked and search the configur file over and over trying to figure out just where they would grab the gcc compiler.

Any help would be greatly welcome......

Re: Secure Shell (ssh2) install on 11.0

Stephen Sneeringer — Wed, 30 Aug 2000 12:10:57 GMT

Here is what I did to load ssh2 using gcc:
From www.hpux.cs.utah.edu/hppd/hpux I got the following packages as recommended by Bill Hart -- gcc2.95.2, binutils2.9.1, bison1.28, & flex2.5.4
Bill recommended several patches which I did not need since I had loaded the most current patch release. If you think you might need to patch see Bill's response by seaching the forum for SSH.

After this I needed to download SSH2 version 2.3 You must use this version as previous ones had trouble generating the .pub codekey.

To configure I used the following parameters:

set path to include gcc, binutils, flex, bison, and ssh2
set variable--- CC=gcc

Follow install instructions with these values:
./configure --host=hpp2.0-hp-hpux11.00 --disable-static --enable-debug
make
make install

NOTE: If the install fails and you want to re-compile after changes remember that the file config.cache are the values it will use to re-config. Remove it or modify it with new values.

I hope this info will help.

Re: Secure Shell (ssh2) install on 11.0

Asad Malik — Mon, 18 Sep 2000 14:29:27 GMT

Hi
I am following the procedure and getting following message when try to run make
"can not load gcc"
i have set CC=gcc

Re: Secure Shell (ssh2) install on 11.0

Asad Malik — Mon, 18 Sep 2000 14:34:39 GMT

Hi
I am following the procedure and getting following message when try to run make
"can not load gcc"
i have set CC=gcc