topic Re: System information in Operating System - HP-UX

System information

SAM_24 — Mon, 03 Jun 2002 14:25:46 GMT

Hi,

Is there any handy command which gives system information like no. of cpu,memory,system defects etc...?

Sysinfo can be installed. But it is comprehensive.

Thanks.

Re: System information

Pete Randall — Mon, 03 Jun 2002 14:28:10 GMT

Raj,

Do a forums search on cpu speed. This question comes up often.

Pete

Re: System information

James R. Ferguson — Mon, 03 Jun 2002 14:28:46 GMT

Hi Raj:

Since I'm sure you make periodic Ignite recovery tapes, you have a free report everytime you run 'make_tape_recovery' without doing anyting else! See the Ignite system manifest:

/var/opt/ignite/recovery/latest/manifest

Regards!

...JRF...

Re: System information

S.K. Chan — Mon, 03 Jun 2002 14:29:30 GMT

An exmample from previous thread ..

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x5bca91ccb36bd611abdb0090277a778c,00.html

hope it helps..

Re: System information

Helen French — Mon, 03 Jun 2002 14:30:23 GMT

Try these:

# print_manifest (if ignite present)
# stm
# dmesg
# ioscan -fn
# sam

Re: System information

Pete Randall — Mon, 03 Jun 2002 14:32:08 GMT

Raj,

Try this link:
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x53b2ba808b46d611abda0090277a778c,00.html

Pete

Re: System information

Sanjay_6 — Mon, 03 Jun 2002 14:34:28 GMT

Hi Raj,

Try STM.

echo 'selclass qualifier all;info;wait;infolog' |cstm >/tmp/system_info.txt

more /tmp/system_info.txt

If you don't have STM installed on your system, you can download and install STM from this site,

http://software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=B6191AAE

Hope this helps.

Regds

Re: System information

Jeff Schussele — Mon, 03 Jun 2002 14:53:17 GMT

Hi Raj,

Try the Sysinfo utility

http://gatekeep.cs.utah.edu/hppd/hpux/Sysadmin/sysinfo-3.3.1/

Gives all you asked & MUCH more.

HTH,
Jeff

Re: System information

MANOJ SRIVASTAVA — Mon, 03 Jun 2002 14:59:40 GMT

Hi Raj

1. print_manifest if you ahve ignite installed.
2. stm
3. dmesg
4. sam--->perforamnce monitors---->system properties
5.top
6.glance

Manoj Srivastava

Re: System information

D. Jackson_1 — Mon, 03 Jun 2002 16:43:40 GMT

You may also try this:

echo "selall;info;wait;infolog;view;done" | cstm | mail user_name@xxx.xxx.xxx.com

HTH

Re: System information

Sandip Ghosh — Mon, 03 Jun 2002 17:27:10 GMT

You can install cfg2html. It gives details in HTML format. It is available free on the web.

Sandip

Re: System information

Abdul Salam H S_1 — Tue, 04 Jun 2002 08:29:56 GMT

Hi,

You can also try using the nickel utility. This will collect all system informations and will be available in HTML format.

Regds,
Salam

Re: System information

Steve Steel — Tue, 04 Jun 2002 10:12:39 GMT

Hi

http://www.unixguide.net/scripts/hpsysinfo130

Is cool

sysinfo
hostname : topaz
model : 9000/899/K570 (server)
CPU : (3) PA8000 200 MHz (PA-RISC 2.0)
RAM : 1023.9 MB
OS : HP-UX B.11.00 (64-bit)
JVM : Java 1.3.1.01-release (/opt/java1.3/bin/java)

Options
sysinfo -?
usage: print_help [-gdpaqv?]

-g : general stats (default)
-d : disk info
-p : patches installed
-a : all of the above
-q : quiet mode (no progress status; use if redirecting output to a file)
-v : sysinfo version
-? : describe options

Steve steel