topic Metrocluster toolkit problem in Operating System - HP-UX

Metrocluster toolkit problem

paabhi — Fri, 15 Oct 2010 12:45:19 GMT

Hi All,

We have builded a new Continental cluster recently.The config details are,

Server Model :BL 860c
OS version :11.31
CC Version :A.07.01
SG Version :A.11.19
Storage :EMC DMX 4

We have done the migration of one replicated package successfully.When we did the migration for second package, the migration went successfully.But the failover of the package to DR site through Metrocluster failed with the following error.

""Failover" : SYMAPI Error(3546) - "The
specified RA group is not valid". Please check
/var/symapi/log/symapi-20101015.log for any SYMAPI errors."

I have compared the dg which was successful and the one which was failed.The only difference I found is that the RA number for the failed DG is 78 & the successful DG is "51".

I have created a test DG and assigned a number (less than 64 )as RA number.The failover went successfully to DR site with Metrocluster.Then I assigned 74 as the RA number to the test DG.Then the failover to DR with Metrocluster failed.

Please anyone tell me whether there is any dependency of RA number with Metroclustertoolkit.

If yes how can we overcome this.

Abhilash

Re: Metrocluster toolkit problem

melvyn burnard — Fri, 15 Oct 2010 13:13:25 GMT

As you have logged a case with the HP RC, and it has been elevated, I suggest you rather deal with this through that route, as this is a complex issue

Re: Metrocluster toolkit problem

paabhi — Fri, 15 Oct 2010 13:33:31 GMT

Thanks.I just put here to check and known issues were there like this

Re: Metrocluster toolkit problem

melvyn burnard — Fri, 15 Oct 2010 13:43:22 GMT

Well, as you have assigned points to only 3 of the 95 responses to your questions, you may find it a little slow to get any input.
And again, this is not a simple area to be looking for known issues.

Re: Metrocluster toolkit problem

paabhi — Fri, 15 Oct 2010 13:58:08 GMT

Hello,

Sorry,I am not aware how to submit points....All are telling me.....

I will start that ....sorry all

Abhilash

Re: Metrocluster toolkit problem

Dennis Handly — Fri, 15 Oct 2010 14:06:46 GMT

>I am not aware how to submit points

http://forums.itrc.hp.com/service/forums/helptips.do?#33
Your list of unassigned points:
http://forums.itrc.hp.com/service/forums/pageList.do?userId=WW271480&listType=unassigned

Re: Metrocluster toolkit problem

paabhi — Fri, 15 Oct 2010 14:17:06 GMT

Thanks....I will be assigning for all