https://community.hpe.com/t5/operating-system-hp-ux/dtc-terminal-display/m-p/4300207#M673623 Hi,<BR />we are using dtc16 with a L1000 HPUX 11.0 and 700/60 Terminals. On the terminals, the screen display is split into 2 parts; upper-part - pause 2 seconds - lower part. (if a relevant part if the screen content is modified). <BR /><BR />the terminals are connected directly to the dtc, this to the L1000. there should be a parameter to allow screen display without pausing; but which one? grateful for any ideas<BR /><BR />thanx Tue, 04 Nov 2008 16:50:17 GMT Zielonka 2008-11-04T16:50:17Z https://community.hpe.com/t5/operating-system-hp-ux/dtc-terminal-display/m-p/4300207#M673623 Hi,<BR />we are using dtc16 with a L1000 HPUX 11.0 and 700/60 Terminals. On the terminals, the screen display is split into 2 parts; upper-part - pause 2 seconds - lower part. (if a relevant part if the screen content is modified). <BR /><BR />the terminals are connected directly to the dtc, this to the L1000. there should be a parameter to allow screen display without pausing; but which one? grateful for any ideas<BR /><BR />thanx Tue, 04 Nov 2008 16:50:17 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc-terminal-display/m-p/4300207#M673623 Zielonka 2008-11-04T16:50:17Z https://community.hpe.com/t5/operating-system-hp-ux/dtc-terminal-display/m-p/4300208#M673624 I think you may try to play with -z and -s option of telnetd.<BR /> Wed, 05 Nov 2008 17:37:07 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc-terminal-display/m-p/4300208#M673624 Laurent Menase 2008-11-05T17:37:07Z