topic Ignite Errors in Operating System - HP-UX

Ignite Errors

Michael Campbell — Fri, 07 Jun 2002 08:53:35 GMT

Hi

When doing an Ignite Backup (make_tape_recovery -A -a /dev/rmt/0mn) of our systems I am getting the following errors for a lot of the disks:

vgcfgbackup: Warning: couldn't query physical volume "/dev/dsk/c8t0d1":
The specified path does not correspond to physical volume attached to
this volume group
vgcfgbackup: /etc/lvmtab is out of date with the running kernel:Kernel indicate.
Cannot proceed with backup.

There doesn't seem to be any problems with the servers apart from these errors and the Ignite backup is running OK after the errors. Why would these errors be coming up?
Both the systems are connected to the same XP256, could this be the problem?

Thanks

Michael

Re: Ignite Errors

T G Manikandan — Fri, 07 Jun 2002 09:10:01 GMT

Hello,
Just move your lvmtab file .

#mv /etc/lvmtab /etc/lvmtab.old
#vgscan -v

to build the new lvmtab file.

Thanks

Re: Ignite Errors

Alex Glennie — Fri, 07 Jun 2002 09:40:04 GMT

As per info given by the UKRC s/w support case : see KBRC00000632.

no points please just wanted to add this to the forums knowledge base.

Re: Ignite Errors

Michael Campbell — Fri, 07 Jun 2002 09:52:55 GMT

Alex

How do I access that support call reference?, when I enter the ID into my Software Call Manager, it doesn't find it.

TG
Unfortunately, when I run vgscan -v I get the same errors. Any other ideas?

Michael

Re: Ignite Errors

Alex Glennie — Fri, 07 Jun 2002 10:14:11 GMT

I'm informed Ian the UK RC engineer dealing with your case .... he's on the phone to a customer at present hopefully he will call or email you shortly.

Re: Ignite Errors

Alex Glennie — Fri, 07 Jun 2002 10:19:49 GMT

ps did you check your email : sent to michael.campbell@

Ian sent you a much more detailed doc which referred to other steps too (ie not just running vgscan -v ) ?

Alex