topic fbackup tape usage counting in Operating System - HP-UX

fbackup tape usage counting

gary weng — Fri, 12 Sep 2008 03:14:58 GMT

Does anyone know why the fbackup count the usage time from minus 1?
There is the log from fbackup.
Begin fbackup to rx66 2m Time: Thu Sep 11 02:50:59 EAT 2008

fbackup(1004): session begins on Thu Sep 11 02:50:59 2008

fbackup(3203): volume 1 has been used -1 time(s)

fbackup(3024): writing volume 1 to the output file /dev/rmt/2m

fbackup(3055): total file blocks read for backup: 27681093

fbackup(3056): total blocks written to output file /dev/rmt/2m: 28195833

End fbackup to rx66 2m Time: Thu Sep 11 04:08:40 EAT 2008

-----

Begin fbackup to rx66 2m Time: Thu Sep 11 10:35:23 EAT 2008

fbackup(1004): session begins on Thu Sep 11 10:35:23 2008

fbackup(3203): volume 1 has been used 0 time(s)

fbackup(3024): writing volume 1 to the output file /dev/rmt/2m

Re: fbackup tape usage counting

Robert-Jan Goossens_1 — Fri, 12 Sep 2008 07:03:15 GMT

Hi,

Looks like a known error.

Title: fbackup(3203): volume 1 has been used -1 time(s) on 2nd fb. of new tape
Document ID: ucr_na-KMN4701414607-1

http://www12.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=ucr_na-KMN4701414607-1

Just info not a solution

Regards,
Robert-Jan

Re: fbackup tape usage counting

public — Mon, 15 Sep 2008 05:27:04 GMT

Tks Robert, Thread closed

Re: fbackup tape usage counting

gary weng — Mon, 15 Sep 2008 05:30:40 GMT

thread close