topic CDRecord in Operating System - HP-UX

CDRecord

Schubach — Fri, 18 Jul 2008 06:52:45 GMT

Need help to get cdrecord work on HP-UV 11.31.

Re: CDRecord

Shrikant Lavhate — Fri, 18 Jul 2008 08:08:57 GMT

Hi,

You can use dvd tools for DVD which is similar to CDRecord.

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPUXDVDWRITE

Re: CDRecord

Steven Schweda — Fri, 18 Jul 2008 10:25:39 GMT

I normally use cdrecord on VMS, but I'd
expect it to work as supplied on HP-UX. I
normally use the latest "alpha" kit from

ftp://ftp.berlios.de/pub/cdrecord/alpha/

(Hmmm. I see that there's another new one.)

What, exactly, is the problem you're having?
(And does it depend on your (unspecified)
hardware configuration?)

Re: CDRecord

Schubach — Mon, 21 Jul 2008 05:29:11 GMT

Hello, we have new iternium Server, and one has an DVD-Burner. So i want to make it run on HP-UX 11.31.
I have download CDRecord from berlios.
The File cdrtools-2.0.tar.gz

Then i unzip the File and i used tar to copy it.
Now i donÂ´t know the next steps.

Re: CDRecord

Shrikant Lavhate — Mon, 21 Jul 2008 05:41:05 GMT

Hi,

You must have downloaded the source code. Goto tar extract directory and read readme file or FAQ file inside. It will show you installation process.
Normally it goes with executing configure file within using ./configure n followed by make install. But, I strongly recommend to read whole readme inside for proper installation process.

Re: CDRecord

Schubach — Mon, 21 Jul 2008 06:05:26 GMT

when i use ./configure n there will be a message that i have to use Gmake.
When i try to use ./Gmake, the reponse is :
./Gmake[4]: gmake: not found.
And thsts all.

Re: CDRecord

Dennis Handly — Mon, 21 Jul 2008 06:09:25 GMT

>When i try to use ./Gmake, the response is:
./Gmake[4]: gmake: not found.

You must download gmake and install that too:
http://hpux.cs.utah.edu/hppd/hpux/Gnu/make-3.81/

Re: CDRecord

Schubach — Mon, 21 Jul 2008 06:09:42 GMT

The File that i have Download was :

cdrecord-beta.tar.gz

Sorry that i was wrong in my first replay.

Was it the wromg file?
Which File(s) shall i download?

Re: CDRecord

Duncan Edmonstone — Mon, 21 Jul 2008 06:24:17 GMT

Hi,

When you say new 11.31 server, what model do you mean? Be aware that those with USB attached DVDs *cannot* write to the DVD/RW devices until drivers are released sometime later this year.

So that would be rx2660, rx3600 and rx6600 as well as BL860c and BL870c.

SCSI attached DVD/RW devices should be OK.

HTH

Duncan

Re: CDRecord

Schubach — Mon, 21 Jul 2008 06:35:01 GMT

Hi,
we have 3 rx3600 and one of them has an internal DVD R/RW &CD-R/RW DRIVE from Sony.
The model is ND-6650A.
It is internal, so i think it is SCSI.

Re: CDRecord

Steven Schweda — Mon, 21 Jul 2008 13:38:00 GMT

> [...] from Sony.
> The model is ND-6650A.
> It is internal, so i think it is SCSI.

Google suggests that "internal" is the only
part of that which makes any sense.

> cdrecord-beta.tar.gz

That appears to be a link to something,
possibly the latest kit. I normally fetch
the latest kit by its own name, so I can know
what I'm getting. What's the last
"AN-2.01_01aXX" file you got?

> when i use ./configure n there will be a
> message that i have to use Gmake.

Read the README files.

Re: CDRecord

Torsten. — Mon, 21 Jul 2008 13:43:20 GMT

>>"It is internal, so i think it is SCSI."

No, it's internal but USB!

Read Duncans comment again, please.

BTW, ND-6650A is NEC, not sony.

Re: CDRecord

Torsten. — Mon, 21 Jul 2008 13:46:38 GMT

This is a line from ignite's print_manifest (taken from a rx3600):

_NEC DVD+-RW ND-6650A 0/0/2/1.0.16.0.0 USB SCSI Stack Adaptor