topic Re: ftp from hp-ux11.0 to windows fails in Operating System - HP-UX

ftp from hp-ux11.0 to windows fails

moiauh — Sun, 16 Nov 2008 14:29:38 GMT

Hi all,
While doing ftp from HP-UX11.0 to windows, ftp fails. The file size is 146gb.ftp terminates after transferring above 25gb.any idea how to solve this problem?

Re: ftp from hp-ux11.0 to windows fails

Dennis Handly — Sun, 16 Nov 2008 14:43:35 GMT

Any particular error message?
I assume you have that much space?

Re: ftp from hp-ux11.0 to windows fails

moiauh — Sun, 16 Nov 2008 15:04:02 GMT

have enough space.is there any limitation to do ftp in hpux 11.0?

Re: ftp from hp-ux11.0 to windows fails

Dennis Handly — Sun, 16 Nov 2008 15:19:02 GMT

>is there any limitation to do ftp in hp-ux 11.0?

Are you starting the transfer from Windows or HP-UX?
I would assume there is no limitation for reading from HP-UX and if there were, it would kick in at 2 Gb.
Of course 11.00 is not supported.

Re: ftp from hp-ux11.0 to windows fails

Steven Schweda — Sun, 16 Nov 2008 15:37:49 GMT

> While doing ftp [...]

This does not describe what you did.

> [...] ftp fails.

This does not describe what happened when you
did it.

> [...] from HP-UX11.0 to windows [...]

This does not describe the software
(including the FTP client and server
prograns) which you used.

> Any particular error message?
> 1 pts

If you think that that was worth "1 pts", how
much do you think that your question was
worth? (Hint: Less than "0 pts".)

Re: ftp from hp-ux11.0 to windows fails

moiauh — Sun, 16 Nov 2008 15:40:33 GMT

infact i tried from hp-ux to a windows ftp server and from windows to hpux.in both the case i got the same o/p.

in windows

c:\ftp ipaddr.of hpux server
username &pw
ftp>bin
ftp>cd /backup
ftp> get exp.dat

and same thing i tried from hpux
hp:/backup>
>ftp windowsftp serverip
>username&pw
>put exp.dat
in both case the ftp terminated after some time.

Re: ftp from hp-ux11.0 to windows fails

Dennis Handly — Sun, 16 Nov 2008 16:16:13 GMT

>in both case the ftp terminated after some time.

And what were the messages?

Do you have space to ftp the file from/to the same HP-UX system? If that works, your problem is with windows.

Re: ftp from hp-ux11.0 to windows fails

James R. Ferguson — Sun, 16 Nov 2008 17:26:43 GMT

Hi:

To assist debugging, I would turn on verbose mode:

# ftp -v ...

It might also be informative to try FTPing your file from Windows-to-Windows as well as from HP-to-HP. That is, FTP the file to yourself on *each* platform.

Regards!

...JRF...

Re: ftp from hp-ux11.0 to windows fails

rmueller58 — Mon, 12 Jan 2009 18:51:30 GMT

That is a big file to xfer with FTP.. Are you doing a GET from a Windows Client? or doing a put to an FTP server?

Does the Windows box have enough diskspace to handle the XFER?

If you have SSH enabled on your HP 11.00 use an SSH/SFTP client and try to do it with SSH instead. SSH / SFTP has better retry error handling then FTP.