topic Re: CPU info command in Operating System - HP-UX

CPU info command

Mike McFarland — Thu, 13 Jun 2002 11:21:15 GMT

Is there a command I can execute to give me detailed info on the installed cpu(s)?

Re: CPU info command

Sanjay_6 — Thu, 13 Jun 2002 11:23:56 GMT

Hi Mike,

If you have STM installed, try this,

echo 'selclass qualifier cpu;info;wait;infolog' |cstm >/tmp/cpu_info.txt
more /tmp/cpu_info.txt

Hope this helps.

Regds

Re: CPU info command

Pete Randall — Thu, 13 Jun 2002 11:25:45 GMT

Not sure exactly what you're looking for but this will give you cpu speed:
HPUX=/stand/vmunix

MHZ=$(echo itick_per_tick/D | adb -k $HPUX /dev/kmem | tail -1 | awk '{print $2/10000}')
echo $MHZ

Else look into print_manifest

Pete

Re: CPU info command

Yogeeraj_1 — Fri, 14 Jun 2002 09:45:33 GMT

Hello,

You can also get all the details easily using SAM (SAM->Performance Monitors->System Properties).

Example:
Processors:
Active: 2
Total: 2
CPU Version: 1.0 PA7000
Clock Frequency: 160 MHz
Machine Identification: 1279860382
Hardware Model: 9000/800

You can get the following information as well:
- Memory
- Operating System
- Network
- Dynamic

This adds to the information provided by the two people above...

Best Regards
Yogeeraj

Re: CPU info command

Tim D Fulford — Fri, 14 Jun 2002 09:47:10 GMT

if you have Ignite-UX print_manifest

Tim