topic Re: Shell script help in Operating System - HP-UX

Shell script help

Adam W. — Tue, 07 Oct 2008 18:14:56 GMT

I have this script but some of the output isn't working It is supposed to give me:
CPU_binary:
Processor Type:
CPU speed:
No. of CPU's:
etc......
etc......

But here is the output I get.

CPU_BINARY : PA-RISC 2.0
PROCESSOR TYPE : PA8600
CPU-SPEED : 1000 MHz
NO. OF CPUS : 8
symbol not found
KERNEL SUPPORT : 32 BITS
expr: Syntax error

System Memory : MB
OS VER : HP-UX B.11.11

Can someone take a look and tell me what I am missing?

Re: Shell script help

Ivan Krastev — Tue, 07 Oct 2008 18:32:59 GMT

Some parameters are missing/replaced.
This script is useful for older versions of HP-UX.

Here is an more info about 1st error - http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=38535

regards,
ivan

Re: Shell script help

James R. Ferguson — Tue, 07 Oct 2008 18:35:54 GMT

Hi Adam:

The "symbol not found" is from 'adb' not being able to find the string you are asking it to match.

The "expr: Syntax error" arises from trying to evaluate an empty value. In this case $MM for your memory.

You have essentially all this information in your Ignite print_manifest;

/var/opt/ignite/recovery/latest/manifest

...which you gret for "free" every time you run an Ignite recovery which I'm sure you do routinely :-)

Regards!

...JRF...

Re: Shell script help

Adam W. — Tue, 07 Oct 2008 18:40:36 GMT

Thanks guys.