topic Re: Getting error while building a depot file on HP-UX IA64 11.31 in Operating System - HP-UX

Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 04:06:05 GMT

Hi All,
I wanted to make depot file for one of my software releases. I am getting the below error:

# make hpux-ia64
(cd lib; make -f Makefile.ia64)
Archiving libpwplus.a ...
ar cru libpwplus.a cfckpw.o cfgrules.o getrpw.o hashpw.o load.o log.o test.o testfnc.o util.o
ar: libpwplus.a not in archive format
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.

Any idea on what this can be?

Thanks in advance and with regards,
Pravin

Re: Getting error while building an archive lib on HP-UX IA64 11.31

Dennis Handly — Tue, 06 Sep 2011 07:00:48 GMT

(I see no depots here, just an archive lib.)

>ar: libpwplus.a not in archive format

You need to remove this file and start fresh.

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 04:42:41 GMT

Hi Denis,

Thanks for the reply.
You mean i delete libpwplus.a file and put it back?

Re: Getting error while building an archive lib on HP-UX IA64 11.31

Dennis Handly — Tue, 06 Sep 2011 07:01:12 GMT

>You mean I delete libpwplus.a file

Yes, remove it and then make.

Re: Getting error while building an archive lib on HP-UX IA64 11.31

Dennis Handly — Tue, 06 Sep 2011 07:00:24 GMT

In fact your archive lib make rule should have that rm there:
libpwplus.a: cfckpw.o ...
rm -f $@
ar cru $@ cfckpw.o ...

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 04:56:58 GMT

Thanks Dennis.

make hpux-ia64 works now :)

But after that when i get to do

> make package.HPUXB1122

it throws below error:

* Software selections:
*

* Beginning Selection Phase.
* Reading the Product Specification File (PSF)
"swpackage_ia64.psf".
", at line 21.lue defined for the keyword "
", at line 22.lue defined for the keyword "vendor
ERROR: Incomplete definition for the Product Specification File (PSF)
"swpackage_ia64.psf", beginning at line 21. The following
attributes are not defined:
products the products contained in the PSF
The attribute(s) must be defined before the parsing can
continue.

======= 11/12/08 17:59:07 EST END swpackage SESSION

*** Error exit code 1

Stop.

Any idea what can this be....

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:02:50 GMT

Oh.. I just saw.. that had ^M characters.. Removed it.. working i suppose.. yet to test...

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:14:33 GMT

Something new now...

The depot file is made successfully. But when I try to install it, it gives below:

# swinstall -s /var/pwplus-4.0.hpux-ia64.depot PWplus

======= 11/12/08 18:19:07 EST BEGIN swinstall SESSION
(non-interactive) (jobid=rx26-154-0079)

* Session started for user "root@rx26-154".

* Beginning Selection
* Target connection succeeded for "rx26-154:/".
ERROR: Could not apply the software selection "PWplus" because there
are no product variations that are compatible with the
destination host(s).
* Software selection failed for
"rx26-154:/var/pwplus-4.0.hpux-ia64.depot".
ERROR: No software has been selected.
ERROR: Cannot continue the "swinstall" task.
* Selection had errors.

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:15:40 GMT

Can this be because I made this depot file for 11.23 I suppose and trying to install it on 11.31.

But, as long as it is IA 64 this should work?

Re: Getting error while building a depot file on HP-UX IA64 11.31

Dennis Handly — Wed, 12 Nov 2008 05:29:29 GMT

>Can this be because I made this depot file for 11.23 I suppose and trying to install it on 11.31?

Very possibly.

>as long as it is IPF this should work?

If you are doing swpackage, you should package it so it works on 11.23 and 11.31.

What does this show for your depot?
swlist -l fileset -a software_spec -a architecture -a machine_type \
-a os_release -s /var/pwplus-4.0.hpux-ia64.depot

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:31:14 GMT

# swlist -l fileset -a software_spec -a architecture -a machine_type \
> -a os_release -s /var/pwplus-4.0.hpux-ia64.depot
# Initializing...
# Contacting target "rx26-154"...
#
# Target: rx26-154:/var/pwplus-4.0.hpux-ia64.depot
#

# PWplus PWplus,r=4.0.r.0,a=HP-UX_B.11.22_ia64 HP-UX_B.11.22_ia64 * ?.11.2*
PWplus.PWPLUS PWplus.PWPLUS,r=4.0.r.0,a=HP-UX_B.11.22_ia64,fr=4.0.r.0,fa=HP-UX_B.11.22_ia64 HP-UX_B.11.22_ia64 *

How can I make depots for both 11.23 and 11.31?

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:34:53 GMT

I did upload the package on 11.23 machine to check..

Initial phase passed but analysis phase didnt.. output as below:

# swinstall -s /cvsroot/pwplus-4.0.hpux-ia64.depot PWplus

======= 11/11/08 21:45:07 MST BEGIN swinstall SESSION
(non-interactive) (jobid=cs-rx261-0329)

* Session started for user "root@cs-rx261".

* Beginning Selection
* Target connection succeeded for "cs-rx261:/".
* Source: /cvsroot/pwplus-4.0.hpux-ia64.depot
* Targets: cs-rx261:/
* Software selections:
PWplus.PWPLUS,r=4.0.r.0,a=HP-UX_B.11.22_ia64,fr=4.0.r.0,fa=HP-UX_B.
11.22_ia64
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
ERROR: "cs-rx261:/": 1 check scripts failed.
* The analysis phase failed for "cs-rx261:/".
* Analysis and Execution had errors.

NOTE: More information may be found in the agent logfile using the
command "swjob -a log cs-rx261-0329 @ cs-rx261:/".

======= 11/11/08 21:45:13 MST END swinstall SESSION (non-interactive)
(jobid=cs-rx261-0329)

# swjob -a log cs-rx261-0329 @ cs-rx261:/
======= 11/11/08 21:45:07 MST BEGIN install AGENT SESSION (pid=10319)
(jobid=cs-rx261-0329)

* Agent session started for user
"root@cs-rx261.digitalindiasw.net". (pid=10319)

* Beginning Analysis Phase.
* Source:
cs-rx261.digitalindiasw.net:/cvsroot/pwplus-4.0.hpux-ia64.depot

* Target: cs-rx261:/
* Target logfile: cs-rx261:/var/adm/sw/swagent.log
* Reading source for product information.
* Reading source for file information.
ERROR: Cannot execute
"/var/tmp/BAAa10319/catalog/PWplus/PWPLUS/checkinstall".
Command or script output (if any):
No such file or directory (2).
ERROR: The "checkinstall" script for "PWplus.PWPLUS" failed (exit
code "1"). The script location was
"/var/tmp/BAAa10319/catalog/PWplus/PWPLUS/checkinstall".
* This script had errors and the execution of this fileset
cannot proceed until the problem is fixed. Check the above
output from the script for further details.
* Executing preDSA command.

* Summary of Analysis Phase:
ERROR: Exclude PWplus.PWPLUS,r=4.0.r.0
ERROR: 1 of 1 filesets had Errors.
ERROR: The Analysis Phase had errors. See the above output for
details.

======= 11/11/08 21:45:13 MST END install AGENT SESSION (Cancelled)
(pid=10319) (jobid=cs-rx261-0329)

Re: Getting error while building a depot file on HP-UX IA64 11.31

Dennis Handly — Wed, 12 Nov 2008 05:35:16 GMT

>How can I make depots for both 11.23 and 11.31?

Well, if you don't care about 11.22 or 11.41, you can just change ?.11.2* to:
B.11.23|B.11.31

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:36:45 GMT

You mean I execute the below command?

make package.HPUXB11.23|B11.31

Re: Getting error while building a depot file on HP-UX IA64 11.31

Dennis Handly — Wed, 12 Nov 2008 05:44:15 GMT

>You mean I execute the below command?

I have no clue of the connection of that command and the os_release entry in the PSF file.

>ERROR: Cannot execute
"/var/tmp/BAAa10319/catalog/PWplus/PWPLUS/checkinstall".

Have you supplied checkinstall with your depot?

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:49:43 GMT

Yes I have...

# pwd
/opt/pwplus/packaging/PWPLUS
[rx26-154]/opt/pwplus/packaging/PWPLUS
# cat checkinstall
#!/sbin/sh
##############################################################################
# $Id: //pwplus/main/src/packaging/ia64/PWPLUS/checkinstall#1 $
#
# Description: Checkinstall script for PWPLUS fileset.
#
# OS-Release: HP-UX 11.2x
#
# (C) Copyright 1999-2003, Hewlett-Packard, all rights reserved.
##############################################################################

PRODUCT_DIR=${SW_LOCATION%/} # Product location
UTILITIES=/usr/lbin/sw/control_utils # SD utilities

UX_CORE_FILESET="OS-Core.UX-CORE" # UX CORE fileset
PASSWD_CMD=/usr/bin/passwd # passwd command location
PASSWD_CMD_FACT=${PASSWD_CMD}.prepwplus # Factory passwd command

##############################################################################
# Function area
##############################################################################
#
# CheckFileIntegrity():
#
# Check passwd command integrity (size, checksum)
#
CheckFileIntegrity ()
{
typeset PasswdCmd=${1:-missing}
typeset ReturnValue=0 # Anticipate success

# Get original filename of hard-linked file
PasswdCmdsrc=$(swlist -lfile -atype -alink_source $UX_CORE_FILESET |
awk '$1 == "'$PasswdCmd'" {if ($2 == "h" && $3 != "") print $3
else print $1 }')

if [[ -n $PasswdCmdSrc ]]; then
# Get original file size and checksum
SizeOrig=$(swlist -lfile -asize $UX_CORE_FILESET |
awk '$1 == "'$PasswdCmdSrc'" {print $2}')

CheckSumOrig=$(swlist -lfile -acksum $UX_CORE_FILESET |
awk '$1 == "'$PasswdCmdSrc'" {print $2}')

# Get current file size and checksum
Size=$(cksum $PasswdCmd 2>/dev/null | awk '{print $2}')
CheckSum=$(cksum $PasswdCmd 2>/dev/null | awk '{print $1}')

# Check for passwd command
if [[ ! -f $PasswdCmd ]]; then
echo "ERROR: $PasswdCmd does not exist."
ReturnValue=1
fi
# Check file size
if [[ $Size != $SizeOrig ]]; then
echo "ERROR: $PasswdCmd should have size \"$SizeOrig\""
echo " but the actual size is \"$Size\"."
ReturnValue=1
fi
# Check file checksum
if [[ $CheckSum != $CheckSumOrig ]]; then
echo "ERROR: $PasswdCmd should have checksum \"$CheckSumOrig\""
echo " but the actual checksum is \"$CheckSum\"."
ReturnValue=1
fi
else
echo "NOTE: $PasswdCmd integrity cannot be checked because not"
echo " registered in IPD database."
ReturnValue=255
fi

return $ReturnValue
}
# end CheckFileIntegrity

#
# CheckPasswdCmd():
#
# Check passwd command for integrity (size, checksum, permissions)
#
CheckPasswdCmd ()
{
typeset ReturnValue=0 # Anticipate success

# Get current root suid passwd command
Suid0Cmd=$(find $PASSWD_CMD -perm -4000 -user root 2>/dev/null)

# Check for root suid passwd command
if [[ $Suid0Cmd != $PASSWD_CMD ]]; then
echo "ERROR: $PASSWD_CMD should be owned by root and have the suid bit on."
ReturnValue=1
fi

# Check integrity of the passwd and
# eventually passwd.prepwplus commands
CheckFileIntegrity $PASSWD_CMD
RC=$?
if [[ $RC = 255 ]]; then
CheckFileIntegrity $PASSWD_CMD_FACT
RC=$?
fi
[[ $RC = 1 ]] && ReturnValue=1

# Final error message
if [[ $ReturnValue != 0 ]]; then
echo "ERROR: $PASSWD_CMD has been altered. You should consider"
echo " re-installing the \"$UX_CORE_FILESET\" fileset first."
fi

return $ReturnValue
}
# end CheckPasswdCmd

##############################################################################
# MAIN
##############################################################################

ExitValue=0 # Anticipate success
umask 022 # Set reasonable umask

# Source SD utilities
if [[ -f $UTILITIES ]]; then
. $UTILITIES
else
echo "ERROR: Unable to find $UTILITIES"
exit 1
fi

# Check HP-UX revision
if [[ $(uname -r) != ?.11.* ]]; then
echo "ERROR: PWplus is not supported on $(uname -sr)."
exit 1
fi

# Check passwd command for integrity
CheckPasswdCmd
ExitValue=$?

exit $ExitValue

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 05:57:29 GMT

shall i do make clean and then make the depots again?

Re: Getting error while building a depot file on HP-UX IA64 11.31

Dennis Handly — Wed, 12 Nov 2008 06:26:09 GMT

It isn't obvious where the error is in checkinstall. You'll need to add "-x" to the #!/sbin/sh line.

>shall i do make clean and then make the depots again?

To fix the os_release, yes.

Re: Getting error while building a depot file on HP-UX IA64 11.31

Praving5 — Wed, 12 Nov 2008 06:37:22 GMT

why do we need to add "-x"

Re: Getting error while building a depot file on HP-UX IA64 11.31

Ivan Krastev — Wed, 12 Nov 2008 06:42:51 GMT

This will give you more information about error during script execution.

regards,
ivan