topic Re: Error while running cmquerycl in Operating System - HP-UX

Error while running cmquerycl

Ajithkumar — Fri, 25 Aug 2006 07:16:53 GMT

Hi Gurus,

I am facing a problem while running cmquerycl.
OS ver is 11.23 mission critical.

The message is coming is

Error : Permission denied for 127.0.0.1
Warning : Unable to determine local domain name for aig
Looking for other clusters ... Done
Error : Please make sure that proper security access is configured on node AIG through either file based access(pre -A11.16) or role based access and / or that the hostname lookup on node AIG resolves the IP address correctly.

Cluser name given is 'aig'.There is only one node.

What could be the problem....?
Expecting valuable help at the earliest.

With thanks in advance...

Ajith.

Re: Error while running cmquerycl

Geoff Wild — Fri, 25 Aug 2006 07:27:18 GMT

Try adding

127.0.0.1 root

to /etc/cmcluster/cmclnodelist

Rgds...Geoff

Re: Error while running cmquerycl

Geoff Wild — Fri, 25 Aug 2006 07:34:42 GMT

More info in Document ID UMCSGKBRC00008185
: cmquerycl fails with "permission denied"

http://www2.itrc.hp.com/service/cki/search.do?category=c0&prevQueryString=Cluster+Configuration+Commands+Fail+with+%22permission+denied%22&mode=id&searchString=UMCSGKBRC00008185&searchCrit=allwords&docType=Security&docType=Patch&docType=EngineerNotes&docType=BugReports&docType=Hardware&docType=ReferenceMaterials&docType=ThirdParty&dateRange=all&search.x=33&search.y=9

Rgds...Geoff

Re: Error while running cmquerycl

nanan — Fri, 25 Aug 2006 07:35:27 GMT

Hi
Check the file "/etc/cmcluster/cmclnodelist"
Whether or not it is
and there is having nodes names User(root)

Host1 root
Host2 root

Regards
nanan

Re: Error while running cmquerycl

IT_2007 — Fri, 25 Aug 2006 07:46:59 GMT

since it is single node cluster. add following line in .rhosts

127.0.0.1 root

Re: Error while running cmquerycl

Stephen Doud — Fri, 25 Aug 2006 07:49:48 GMT

Do as Nanan said - create a /etc/cmcluster/cmclnodelist and add a line thus:

root

A line must be created for each node in the cluster.

There is no need to add:
127.0.0.1 root

If a /etc/cmcluster/cmclconfig exists but you have not yet created a cluster, remove the file.

If you would like to eliminate the warning message, "Warning : Unable to determine local domain name for aig", edit /etc/hosts thus:

aig. aig

Re: Error while running cmquerycl

Ajithkumar — Fri, 25 Aug 2006 08:26:56 GMT

Hi all,
I have already created /etc/cmcluster/cmnodelist file with entry root.
But there is no .rhosts file

As the server is not accsible for me now , I will just confirm the same and get back to you.

Ajith.