topic Re: cmquerycl in Operating System - HP-UX

cmquerycl

hp100001 — Fri, 27 Jan 2006 15:17:55 GMT

Warning: Unable to determine local domain name for hpsg2

Re: cmquerycl

baiju_3 — Fri, 27 Jan 2006 15:28:29 GMT

Hi ,

Is hpsg2 a package / node name ? Plz post some more info .

Regds ..bl.

Re: cmquerycl

Chan 007 — Fri, 27 Jan 2006 15:54:08 GMT

Hi,

Check this file, /sbin/set_parms

You may need to update your hostname here too..If you have recently modified your hostname or so

Chan

Re: cmquerycl

Deoncia Grayson_1 — Fri, 27 Jan 2006 16:11:14 GMT

Discussions of interest with similar problems:

Hard to pinpoint without more info

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=948194

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=934853

Re: cmquerycl

hp100001 — Fri, 27 Jan 2006 17:33:02 GMT

# cmquerycl -v -C cmclconf.ascii -n hpsg1 -n hpsg2

Begin checking the nodes...
Warning: Unable to determine local domain name for hpsg2
Looking for other clusters ... Done
Error: Node hpsg1 is refusing Serviceguard communication.
Please make sure that the proper security access is configured on node
hpsg1 through either file-based access (pre-A.11.16 version) or role-based
access (version A.11.16 or higher) and/or that the host name lookup
on node hpsg1 resolves the IP address correctly.
Failed to gather configuration information.

Re: cmquerycl

Darrel Louis — Fri, 27 Jan 2006 17:38:22 GMT

Hi,

Is your ident service running, check your /etc/inetd.conf file.

GoodLuck

Darrel Louis

Re: cmquerycl

Svetoslav Gyurov — Fri, 27 Jan 2006 17:41:59 GMT

Hi,

check that you have the following lines in your inetd.conf file:

hacl-probe stream tcp nowait root /opt/cmom/lbin/cmomd cmomd -f /var/opt/
cmom/cmomd.log
hacl-cfg dgram udp wait root /usr/lbin/cmclconfd cmclconfd -p
hacl-cfg stream tcp nowait root /usr/lbin/cmclconfd cmclconfd

Good luck!

--
sve

Re: cmquerycl

Mohanasundaram_1 — Sat, 28 Jan 2006 00:29:45 GMT

Hi,

Since communication is a problem, I would check the .rhosts file or the cmclnodelist file to check if both the server's names are mentioned in the file.

I suggest that you perform all pre-requisite check before actually configuring the cluster. "Managing serviceguard" is the manual you need to have in handy when you do this.
You can also access this manual at http://docs.hp.com

With regards,
Mohan.

Re: cmquerycl

RAC_1 — Sat, 28 Jan 2006 00:48:06 GMT

What is the version of SG?? If at 11.16 and above, you need to put access policies in package/cluster configuration files. For these versions cmclnodelist and .rhosts are used only at the begining-at the time configuring the cluster.

Also from all cluster nodes, can resolve the name/ipaddress for all clustered nodes??

Re: cmquerycl

Stephen Doud — Mon, 30 Jan 2006 08:28:27 GMT

Is 'identd' commented out of /etc/inetd.conf?