topic Re: permission error when executing cmapplyconf in Operating System - HP-UX

permission error when executing cmapplyconf

EJ Stremler — Tue, 31 Jan 2006 12:07:04 GMT

Has anyone encountered this error when modifying the cluster configuration using cmapplyconf? I would like to understand what the syslog message means below...

Any help would be appreciated..

Thanks,

Ed
------------------------------
Modify the cluster configuration ([y]/n)? y Marking/unmarking volume groups for use in the cluster 0%----10%----20%----30%-Modifying the cluster configuration for cluster NUSHP2.
Modifying the package configuration for package dap023-fe.
Modifying the package configuration for package dap021-fe.
Modifying the package configuration for package dap019-fe.
Error: Permission denied accessing node da1250.
Error: Unable to initialize Volume Group /dev/db2301 on node da1250.
Check the syslog file on that node for more information.
cmapplyconf : Unable to apply the configuration
------------------------------------------
syslog:
Jan 31 10:28:58 da1250 cmclconfd[1771]: WARNING: User (root) from ip address (192.168.195.243) does not have privileges to execute command 34. Somebody may be attemptin g un-authorized access to this system.

Re: permission error when executing cmapplyconf

Jeff_Traigle — Tue, 31 Jan 2006 12:11:36 GMT

Make sure the node is in /etc/cmcluster/cmclnodelist

Re: permission error when executing cmapplyconf

Geoff Wild — Tue, 31 Jan 2006 12:12:36 GMT

You need have all nodes in /etc/cmcluster/cmclnodelist

Rgds...Geoff

Re: permission error when executing cmapplyconf

melvyn burnard — Tue, 31 Jan 2006 12:13:00 GMT

Looks like you are using SG 11.16?

If so, you need to verify your security settings, as SG 11.16 onwards does not use cmclnodelist once teh cluster has been created.
Take a read of:
http://docs.hp.com/en/B3935-90078/B3935-90078.pdf
http://docs.hp.com/en/6283/SGsecurityfiles.pdf
http://docs.hp.com/en/5874/securingserviceguard_nov2005.pdf

Re: permission error when executing cmapplyconf

Chan 007 — Tue, 31 Jan 2006 12:34:29 GMT

Sometimes, when you are doing such apply in those versions, you need to add entry in .rhosts for all servers.

Chan

Re: permission error when executing cmapplyconf

Mridul Shrivastava — Tue, 07 Feb 2006 05:52:48 GMT

In addition to it all the files should be at both the nodes and they should be identical.Do take care of permissions before executing the cmquerycl...